Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Fenders

$34.99
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four
$104.99
Bikes have changed, and so should fenders! We threw traditional fender blueprints out the window and designed fenders that solve real problems and are as close to 'fit-everything' as possible.FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is avoided, and end of life plastic is kept out of landfills or incinerators. And because we're trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel.From a design side, the attractive matte finish has the look of alloy fenders, but none of the drawbacks. Dramatically increased length solves the problems of your feet getting wet up front, and your gear (and your riding partner) getting wet out back.Each set of fenders includes our proprietary AXLERUNNER™ and FRAMERUNNER™ mounts, and an expanded hardware assortment to ensure you will be able to fit fenders to almost any bicycle, even if your bike has disc brakes, suspension forks, or simply wasn't designed with provisions for fenders.Construction: FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware Mounting System: FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths Features: Matte finish has the look of alloy, but won't dent or bend, and has a more durable finish FLASCHEGUARD™ material retains all the strength and durability characteristics of regular polycarbonate Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3 M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty Wheel Size Compatibility: 26" / 650B Radius: 350 mm Profile width: 60 mm Tire Compatibility Range: 26 x 1.5 - 2.0" / 650B x 32 - 47 mm Smooth Front Fender Length: 750 mm / 29.5" Rear Fender Length: 1295 mm / 51" Weight: 720g
$109.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty
$109.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty
$104.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty
$104.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty
$104.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty
$65.99
Axiom's Rainrunner DLX Reflex Road Fenders provide the best in rain and mud protection. They're made of super-durable Techniflex plastic that resists breakage even in sub-freezing conditions and there are extra-long mud flaps to keep you clean and on good terms with your riding buddies. They also feature gray-by-day, reflective-by-night 3M Reflex stripes to keep you safe and rustproof stainless-steel stays. Plus, adapters to mount the fenders on bikes with disc brakes and bikes without eyelets are included.
$25.99
Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 652 g / 1.44 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 752 g / 1.66 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 606 g / 1.34 lbs (pair) Construction -Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System Below: Mount to Quick-Release skewers via included AXLE-RUNNERS Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
$46.99
Axiom's Roadrunner LX Reflex Fenders are made of super-durable Techniflex plastic that resists breakage even in sub-freezing conditions. Their mud flaps keep you clean and the gray by day, reflective by night 3M Reflex strips keep you safe. And, they also feature sturdy, easy-to-install stainless steel stays.
Page 1 of 1