Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX Handlebars

(78 matches)
Fitbikeco Skyscraper Bar
$99.99
The current fashion in handlebars is “the bigger the better” and Fit has stepped it up with their newest addition to their line-up. Simply put, the Skyscraper is the tallest bar you can wrap your hands around from Fit. With large, dual radius bends and 4Q baked 4130 straight gauge Chromoly the Skyscraper is built with strength to spare. The bar has a 9.25” rise, 29” width, a comfortable 11° back sweep and is built in the good old USA. RISE (”): 9.25 WIDTH (”): 29 BACK SWEEP(°): 11 UPSWEEP(°): 4 CROSS BAR HEIGHT (”): CROSSBAR WIDTH (”): WEIGHT (lb): 2.14
United Supreme Pedals
$19.99
United's Supreme Pedals are sturdy nylon composite pedals with a 9/16-inch hardened chromoly axle and just the right amount of grip to keep you planted on your pedals. • Molded Nylon Body • 9/16-inch hardened chromoly axle • Loose ball bearings • Weight: 12.6 oz per pair
S & M Bikes Slam XLT Handlebar
$99.99 - $129.99
Over 10 years ago, S&M started making their own bars by hand in their Santa Ana, CA shop because they weren't pleased with the other offerings out there. Their Slam XLT bars are nice and wide at 28 inches, with a 3/4-inch crossbar and an 8-inch rise. And at 1.7 pounds, they're nice and light, too. This width helps you get more leverage coming out of the gate, while jumpers and street riders like the extra stability it brings in the air. They're made from butted 100% heat-treated chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
WeThePeople Raptor Grips
$18.99
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
WeThePeople Removable Brake Hardware
$45.99
WeThePeople's Removable Brake Hardware works with all WTP frames, allowing you to easily remove/add brake hardware. Depending on how you're feeling and what you're riding each day, you can choose to go with or without brakes to make the most of your session. Includes: • 2 thread-in removable U-brake mounts • 2 curved bases (if needed) • 2 U-brake fastening bolts • 2 removable single-bolt gyro tabs • 2 removable cable guides • Brake mount wrench
WeThePeople Seatpost Clamp Bolt & Barrel (Scorpio and Patron Frames)
$8.99
If you've lost or stripped the original bolt to your WeThePeople Scorpio or Patron frame, get this replacement seatpost clamp bolt and get back out there.
WeThePeople Supreme Seat Clamp, 25.4mm
$23.99
WeThePeople's Supreme Seat Clamp is great for adding a little bit of bling to your ride. This clamp is CNC machined from lightweigh 6061 aluminum and it works with standard BMX 25.4mm seatposts.
WeThePeople Team Pivotal Seatpost
$44.99
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
United Direct BMX Tire
$34.99 - $39.99
United's Direct Tire is an ultra-fast high-pressure tire that features a directional pattern with a wider center for improved balance and stability. The whole tire is covered with a fine micro knurling which grips all surfaces at speed, making it a great choice for street, park, and even at the trails when used on the rear. • Wider center directional tread for improved balance • High speed design with low rolling resistance • 120 tpi construction / 110 psi rating • Weights: 2.10": 640g; 2.30": 702g; 2.4": 799g
United Supreme Freecoaster Rear Hub
$239.99
United's Supreme Freecoaster Rear Hub features a right hand drive, one-piece chromoly 9t driver, CNC machined hub shell, oversized precision sealed bearings, and proven internal parts for a bomber setup. It also also comes with a heat-treated chromoly axle and female bolts. • 36-spoke holes • 6061-T6 aluminium hub shell • Heat treated 4130 axle • Heat treated female axle bolts with 6mm allen key slots and 17mm flats
Salt PRO 20
$38.99
Material: full seamless crmo Tubing: 22.2mm, 19mm crosstube Size: 8.5” height, 28.3” width, 12° backsweep, 2.5° upsweep Color: glossy black, white Features: modern, strong quality bar (with crmo crossbar) Weight: 903g (31.85oz : 1.99lb)
S & M Bikes Pitchfork
$229.99 - $249.99
Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design is ready for more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it. And, it's available with your choice of 3/8-inch or 14mm axles.
S & M Bikes XLT Seat Clamp
$14.99 - $24.99
The XLT Seat Clamp from S&M holds your seatpost with a death grip while weighing in at a scant .9 ounces. It fits 25.4mm and 27.2mm seatposts. Get one.
Odyssey Adjustable Quik Slic Kable
$21.99
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration. FEATURES - Adjustable hanger slot allows upper cable to rotate for optimum alignment. - The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex. - Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh. - All Odyssey Linear cables are offered with the K-Shield housing. - Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included. SPECS - Housing length: 995mm - Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended. - Brake requirements: Open-ended U-brake arms. - Works with most brake levers. - Velcro strap included.
Odyssey Bluebird Chain
$32.99
For our Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
Odyssey Cable Knarps
$9.99
- Sold in pairs. - Allen wrench included.
Odyssey Evo 2 Brakes
$89.99
The Evolver Brake was introduced in 2000. It was called the Evolver because it was destined to change the way all U Brakes were designed. If you look at brakes before the Evolver and after, you can see that the name is applied perfectly. The Evo 2 is the natural progression of the original Evolver. It has seen constant refinement and new running changes to keep it as the standard in BMX braking. This design allows for a seemingly limitless amount of cable installation options, while remaining equally powerful as both a front OR rear wheel brake. New forge tooling was created that provides for a sleeker side profile. Arms are forged prior to machining for strength and durability. Contrary to the uneducated in metallurgy, a forged metal piece is of much higher strength than a piece machined from a block of material. - All of the cable set screws are now flat-tipped to prevent excess damage to the cable’s inner wire. Cable lugs are smaller and use a 10mm hex head. - Pre-lugged straddle cable is shorter. - Front cable adapter is smaller and made of aluminum. - Flush surfaces, with the lowest possible overall stack height. - Front or rear wheel use. - Redesigned brake pads. - Two sets of springs (hard and soft for custom tension/modulation). - Spring tension indicators (easy set up). - Newly designed straddle hanger.
Odyssey Ghost Brake Pads
$13.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Odyssey Joysticks Steel Peg
$24.99
- 4140 heat-treated chromoly - Reinforced end and 7 possible peg positions for longer peg life - 3.9-inch (length) x 1-3/8-inch (outer diameter) - 6.4oz (12.8oz/pair) - Sold individually
Odyssey Key Chain
$49.99
Traditional chain pins are 3mm in diameter. The Key Chains are 5mm, and they are available with a hollow or solid pin assembly. These oversized pins are 4 times stronger than traditional pins, and the chances of bending one, whether the pin is hollow or solid, are essentially zero. The 5mm riveted pins provide added strength, but they also provide a bigger contact surface with the chain’s plates, which makes them harder to push out or bend. The hollow pin assembly, by design, allows for a stronger rivet connection to form during manufacturing, resulting in a stronger chain overall. Each plate has a low profile and an extra narrow waist that makes it harder to catch the plates at unwanted times. At 1.4mm, the plates are substantially thicker than the plates of any other chain, and they’re also more than 50% harder to bend than the thickest existing 1.2mm chain plates too. Users can break and re-join the chain with just a 3mm hex key. The chain’s half link plates are taller at the bends to both increase stiffness and minimize stretch. Since the use of a chain breaker to re-join the chain has been eliminated, the pins can retain their original level of tightness from the factory. Also, carrying a spare master link and 3mm allen key in most cases is enough to repair the Key Chain when riding, so lugging around a chain tool is usually unnecessary. By using material as efficiently as possible, Odyssey has strengthened every component of the chain and kept the weight in the same range as their Bluebird chain. Stretching of the chain is minimized by using a standard alternating plate pattern and limiting the chain to a single, beefed up half link. This configuration maximizes the lifespan of the sprocket and driver. - Width: 1/8-inch
Odyssey M2 Monolever
$46.99
The M2 lever works with a single cable or Odyssey’s patented dual cable system. The M2 cable system improves braking power for GYRO users. - Right hand only (works flipped on the left) - M2 specific upper cable and single cable coupler included.
Odyssey Slim-By-Four Brake Pads
$13.99
The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.
Odyssey Springfield Brake Kit
$55.99
The Springfield Brake Kit will provide easy braking upgrades along with value, as the kit will be more affordable than buying each part individually. All necessary hardware will be included as well. Doesn't get much better! - One spring design - Comes with GHOST PADS - Hinged lever clamp - Medium sized lever
Odyssey Thunderbolt Cranks
$224.99
The Thunderbolt is the new and improved descendant of the Twombolt. It is still one of the most technically advanced crank designs on the market. Due to continued advancements in Odyssey's legendary 41-Thermal processing and heat-treatment system, fatigue life has been increased by a massive margin. FEATURES - Laboratory tested and team proven - Updated open-ended spindle cap - New wedge cluster band with greater flexibility - Never-Wobble crank arm and spindle interface guarantee - 41-Thermal lifetime replacement warranty against bending, cracking and breaking SPECS - Traditional sprocket interface - 165, 170, 175 or 180mm-long 22mm Spindle - RHD or LHD - 1 lb. 11.8 oz. (788g)
Nitrous OG Bars 8
$59.99
The new Nitrous bars ride just like Eastern's more expensive bars, at a fraction of the cost. Now you can save your money for some new fronts. - 100% chromoly Rise ("): 8 Width ("): 28.25 Backsweep (°): 12 Upsweep (°): 2 Crossbar Height ("): 5.375 Crossbar Width ("): 9.5 Weight (lb): 1.9
Nitrous Throttle Bar 9.0
$61.99
The Nitrous Throttle features extra thick grip tubing and is 100% Chromoly. Rise ("): 9.0" Width ("): 30.0" Backsweep (°): 12° Upsweep (°): 1° Crossbar Height ("): Crossbar Width ("): Weight (oz): 56.5 oz
La Casa 14mm Peg
$17.99
Get into the groove of grinds with La Casa's Pegs. Made from durable steel, these pegs let you grind your heart out till you're up to speed. They come set up for 14mm axles, but they include 3/8" adapters as well. Get ready for a whole new level of fun. • Sold in pairs
La Casa 14mm Peg Adapter
$3.99
Transform your 14mm pegs to fit a 10mm axle with La Casa's Peg Adapter. • Sold in pairs
La Casa 8-Spine Crankset
$89.99
Las Casa's 8-Spline Crankset is pretty straightforward and pretty darn tough. 175mm heat-treated chromoly arms are paired to an 8-spline heat-treated chromoly spindle for the ultimate in strength and durability. A single-bolt pinch design secures the arms, and some great colors allow you to add some flair to your ride. - For bikes with Mid Bottom Bracket (Bottom Bracket not included.) - Length: 175mm - Spindle: 19mm Chromo - Spindle Splines: 8 - Weight: 34.5oz - 4130 Heat Treated Chromoly Arms - 4140 Heat Treated Chromoly Spindle - Forged heads - Laser Etched Logo on Arms and Spindle
La Casa 8-spline, 19mm Spindle
$29.99
If you've been riding hard and need to replace your 8-spline, 19mm spindle, La Casa has you covered. Don't lose any time, swap 'em out, and get back to it. • Spindle for sealed BB • 19mm wide • 150mm length
Page 1 of 3 Next page