A front load stem for the customer who wants the perfect balance between weight, strength and price. Ryan Metro’s Top load stem has a recessed compression bolt area that creates a seamless flush fitting top cap. Extra material on the underside and top section is machined away to keep the weight down. Hollow clamp bolts keep you locked in while adding to the weight savings. The United logo is machined out of the faceplate to save even more weight, but mostly just for looks.
Material: 6061-T6 alloy, forged finish Color: black Featuress: front loading stem design; 48mm extension with central bore for reduced weight with central bore for reduced weight Weight: 301g (10.61oz : 0.66lb)
Material: 6061-T6 alloy, forged finish Color: black Features: top loading stem design; 50mm extension with central bore for reduced weight with central bore for reduced weight Weight: 311g (10.97oz : 0.68lb)
Material: full cnc machined 6061-T6 alloy Reach: 50mm Colors: black, cyan, pink, polished Features: with central bore for reduced weight Weight: 293g (10.34oz : 0.64lbs)
Material: full cnc machined 6061-T6 alloy Reach: 50mm Colors: black, cyan, pink, polished Features: with central bore for reduced weight Weight: 310g (10.93oz : 0.68lbs)
The S&M Challenger stem is a re-release of S&M's classic top-load stem made in the USA from 6061 aluminum. It features minimal machining for maximum strength, chamfered edges, knee friendly rounded backside and machined Challenger logo on the faceplate for the finishing touches.
Tested by our very own rider, Isaac Barnes, this clean looking American made topload stem is sure to get noticed in the shop. The Enduro Stem is CNC machined aluminum and features solid chromoly bolts. Reach (mm): 49, 52, 55 Stack Height (mm): Rise (Upright / Invert) (mm): 30 / 1.5 Clamp bolts: Pinch Bolts: Weight (oz): 11.2oz, 11.5 oz, 11.85 oz
Finally a top load stem for the rider who wants short reach or does flatland. A shorter variation of the time tested Enduro, this little guy is built with the same quality and reliability of it’s longer cousin. Built in the US and locked down with solid chromoly hardware. Reach (mm): 36 Stack Height (mm): Rise (Upright / Invert) (mm): 30 / 1.5 Clamp bolts: Large Head Stem Bolts Pinch Bolts: Large Head Stem Bolts Weight (oz): 10.25 oz
These bolts are hollow for weight savings and colored zinc for superior corrosion resistance. Each pack comes with 6 bolts.
Replacement large head stem bolts. 6 Bolts in each pack.
Brian Foster's signature topload stem is a CNC machined stem made in the USA from 6061 aluminum. Grooves on the top and bottom sections reduce weight without sacrificing strength. Cutouts on the face plate, a machined Fit logo and a rounded backside make this a very clean looking stem. Reach (mm): 48 Stack Height (mm): Rise (Upright / Invert) (mm): 23/9 Clamp bolts: 8 x 1.25mm Pinch Bolts: 8 x 1.25mm Weight (g): 280
A.K.A. DLR Stem. Made in the USA from 6061 aluminum with large cut-outs to keep weight down. Reach (mm): 51 Stack Height (mm): 31.9 Rise (Upright / Invert) (mm): 8.5 Clamp bolts: 8 x 1.25mm (x4) Pinch Bolts: 8 x 1.25mm (x2) Weight (g): 295
The High-Top is named such not because of Fit’s high standards or its top quality product, but because it is the highest rise stem that they’ve ever produced. At 36mm rise, this stem will get you higher than anything else out there!
A classic topload design exactly the way Mike Aitken wanted his signature stem. Made with pride in the USA. 6061-T6 Aluminum Reach (mm): 53 Stack Height (mm): 28.5 Rise (Upright / Invert) (mm): 24 / 6 Clamp bolts: 8 x 1.25mm Pinch Bolts: 8 x 1.25mm Weight (g): 326
Sean Burns could well be the greatest test dummy for any parts brand ever. He came to us with a strong idea about a solid stem that could hold up against a variety of big drops and rail hops. For Sean, we created a fully CNC machined 7075-t6 alloy stem with a unique offset rear for enhanced clamping (easily flipped too). If you plan on going big, get something that’s going to take the impact. Material: 7075-T6 alloy, full cnc machined Steertube: 1 1/8“ clamp-on Reach: 50mm Colors black, blue, high polished Features: Sean Burns signature stem / very light and strong top load stem / 6mm micro head hollow bolts / maximum machined design so weight is minimal / unique offset rear for improved clamping / can be ridden flipped Weight: 273g (9.62oz : 0.60lbs)
It’s probably best describing the boxer stem as a new wave stem; it’s not only modern and progressive but designed with every ounce of expertise you’d expect from éclat. At 48 mm we believe this stem is near perfect, and you’ll find a slightly different clamping system at the front to offset the clamping force. Comes in a full CNC finish and looks super fresh sat on top of your forks. Material: 6061-T6 alloy, full cnc machined Steertube: 1 1/8“ clamp-on Reach: 48mm Colors: black, blue, high polished Features: very light and strong front load stem / 6mm micro head hollow bolts / unique offset rear for improved clamping / material saving and unique look Weight: 246g (8.68oz : 0.54lbs)
If you have never heard of Nathan Williams then you need your head checking, the BMX innovator from Nashville has been riding and progressing for a while now and continues to raise the bar in terms of ‘technical street riding’ and just doing his own thing. When it came down to working on a stem together he had some interesting ideas, using the pinch system was something we incorporated and just keeping it lightweight and strong was on top of the list. Made from 6061-T6 Alloy and fully CNC machined. It has a 49mm reach and has a unique offset rear for an improved clamping system. Nathan wanted to stem that was going to look, feel great and do the job it was meant for, a brief we felt we were able to deliver. Material: 6061-T6 alloy, full cnc machined Steertube: 1 1/8“ clamp-on Reach: 49mm Colors: black, blue, high polished Features: Extremely light and strong top load stem / 6mm micro head hollow bolts / laser side & cap logo / unique offset rear for improved clamping / material saving and unique look / counter sink cap for a cleaner look Weight: 289g (10.19oz : 0.63lbs)
Simple front load stem. Machined 6061 Aluminum with brushed anodized surfaces and hollow bolts. Reach - 48 mm Weight - 10.2 oz
Simple top load stem. Machined 6061 Aluminum with brushed anodized surfaces and hollow bolts. Reach - 48mm Weight - 10.6 oz
The S&M Redneck FLT Stem is a flatland specific version of the original Redneck stem made in the USA from 6061 aluminum. It features an internal steerer tube clamping system that applies pressure to the steerer tube as the handlebars are tightened. The stem also has a laser-etched S&M logo on the faceplate, machined sides to save weight and a rounded backside. Reach (mm): 26 Stack Height (mm): 46 Rise (Upright / Invert) (mm): 23 Clamp bolts: 8 x 1.25mm Large Head (x4) Pinch Bolts: N/A (Internal Wedge System) Weight (g): 217
"I love the look of a front load stem, no external cut outs, just simple and smooth! The short reach makes my front end feel more responsive and the slightly dipped front lets me run bigger bars without them being too high." - Benny L - Cold Forged T6 Aluminum - Hollow body and top cap - Grade 8 Allen head hardware Reach (mm): 46 Stack Height (mm): Rise (Upright / Invert) (mm): 5/26.5 Clamp bolts: Pinch Bolts: Weight (g): 276.4
La Casa's Large Head Stem Bolts replace the original bolts on your stem. Each pack comes with 6 bolts.
La Casa's Hollow Stem Bolts are hollow for weight savings and colored zinc for superior corrosion resistance. Each pack comes with 6 bolts.
La Casa's Headset Spacers dial in your stem height with several different sizes. They are crafted from aluminum and are for use with 1-1/8th inch steerer tubes.
The Redneck XLT, often imitated but never duplicated, the OG 1 1/8" front clamping stem. We've been running the Redneck since 93', killing off what your dads call the "Gooseneck." It's been through its refinements since then, making it light enough for the track and strong enough for the streets. Reach (mm): 53 Stack Height (mm): 32 Rise (Upright / Invert) (mm): 8.4 Clamp bolts: 8 x 1.25mm Pinch Bolts: 8 x 1.25mm Weight (g): 320
United's Supreme Pedals are sturdy nylon composite pedals with a 9/16-inch hardened chromoly axle and just the right amount of grip to keep you planted on your pedals. • Molded Nylon Body • 9/16-inch hardened chromoly axle • Loose ball bearings • Weight: 12.6 oz per pair
$99.99 - $129.99
Over 10 years ago, S&M started making their own bars by hand in their Santa Ana, CA shop because they weren't pleased with the other offerings out there. Their Slam XLT bars are nice and wide at 28 inches, with a 3/4-inch crossbar and an 8-inch rise. And at 1.7 pounds, they're nice and light, too. This width helps you get more leverage coming out of the gate, while jumpers and street riders like the extra stability it brings in the air. They're made from butted 100% heat-treated chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
WeThePeople's Supreme Seat Clamp is great for adding a little bit of bling to your ride. This clamp is CNC machined from lightweigh 6061 aluminum and it works with standard BMX 25.4mm seatposts.
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
Page 1 of 4 Next page