Filter By:

S&M

(26 matches)
S & M Bikes XLT Seat Clamp
$14.99 - $24.99
The XLT Seat Clamp from S&M holds your seatpost with a death grip while weighing in at a scant .9 ounces. It fits 25.4mm and 27.2mm seatposts. Get one.
S & M Bikes XLT 30.0 Seatpost Clamp
$19.99
Same great XLT Clamp but in 30.0 Sizing for the Blk Mrkt Frames!
S & M Bikes P-Guts
$29.99
The S&M P-guts fit onto yout pivitol post allowing you to run a railed seat with front and back movement
S & M Bikes Long Johnson Pivotal Seat Post - 320mm
$39.99
The Long Johnson pivotal post was designed for dudes who aren't scared to run it long and strong. We've given you 12.5 inches, what you do with it is your business. Low-profile clamping area - so post can be run low, but it’s long to run high.
S & M Bikes Press Fit Mid BB - 19mm
$39.99
- 19mm - Also available in 22mm size
S & M Bikes Press Fit Mid BB - 22mm
$39.99
- 22mm - Also available in 19mm size
S & M Bikes Cymbal Hub Guard
$63.99 - $74.99
• 14mm axle compatible (rear), 3/8-inch axle compatible (front) • Low-profile shapes • Universal fit includes adjustment washers • Available in black and silver
S & M Bikes XLT Redneck
$74.99
The Redneck XLT, often imitated but never duplicated, the OG 1 1/8" front clamping stem. We've been running the Redneck since 93', killing off what your dads call the "Gooseneck." It's been through its refinements since then, making it light enough for the track and strong enough for the streets. Reach (mm): 53 Stack Height (mm): 32 Rise (Upright / Invert) (mm): 8.4 Clamp bolts: 8 x 1.25mm Pinch Bolts: 8 x 1.25mm Weight (g): 320
S & M Bikes Challenger Stem
$79.99
The S&M Challenger stem is a re-release of S&M's classic top-load stem made in the USA from 6061 aluminum. It features minimal machining for maximum strength, chamfered edges, knee friendly rounded backside and machined Challenger logo on the faceplate for the finishing touches.
S & M Bikes Enduro Stem
$89.99
Tested by our very own rider, Isaac Barnes, this clean looking American made topload stem is sure to get noticed in the shop. The Enduro Stem is CNC machined aluminum and features solid chromoly bolts. Reach (mm): 49, 52, 55 Stack Height (mm): Rise (Upright / Invert) (mm): 30 / 1.5 Clamp bolts: Pinch Bolts: Weight (oz): 11.2oz, 11.5 oz, 11.85 oz
S & M Bikes Enduro Stem 36mm
$89.99
Finally a top load stem for the rider who wants short reach or does flatland. A shorter variation of the time tested Enduro, this little guy is built with the same quality and reliability of it’s longer cousin. Built in the US and locked down with solid chromoly hardware. Reach (mm): 36 Stack Height (mm): Rise (Upright / Invert) (mm): 30 / 1.5 Clamp bolts: Large Head Stem Bolts Pinch Bolts: Large Head Stem Bolts Weight (oz): 10.25 oz
S & M Bikes Slam XLT Handlebar
$99.99 - $129.99
Over 10 years ago, S&M started making their own bars by hand in their Santa Ana, CA shop because they weren't pleased with the other offerings out there. Their Slam XLT bars are nice and wide at 28 inches, with a 3/4-inch crossbar and an 8-inch rise. And at 1.7 pounds, they're nice and light, too. This width helps you get more leverage coming out of the gate, while jumpers and street riders like the extra stability it brings in the air. They're made from butted 100% heat-treated chromoly for serious durability and the clamping area is deeply knurled. Set 'em and forget 'em.
S & M Bikes Flatland Redneck FLT Stem
$109.99
The S&M Redneck FLT Stem is a flatland specific version of the original Redneck stem made in the USA from 6061 aluminum. It features an internal steerer tube clamping system that applies pressure to the steerer tube as the handlebars are tightened. The stem also has a laser-etched S&M logo on the faceplate, machined sides to save weight and a rounded backside. Reach (mm): 26 Stack Height (mm): 46 Rise (Upright / Invert) (mm): 23 Clamp bolts: 8 x 1.25mm Large Head (x4) Pinch Bolts: N/A (Internal Wedge System) Weight (g): 217
S & M Bikes Pitchfork - 14mm
$179.99
- Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 14mm Weight (lb): 2.11
S & M Bikes Pitchfork - 3/8
$179.99
- Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.11
S & M Bikes Pitchfork 18
$179.99
- One piece CNC machined steerer tube - Welded in compression sleeve - True Temper butted legs - CNC machined top cap - Laser cut drop-outs - Made in USA Height (mm): 289.5 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2
S & M Bikes Pitchfork 24
$179.99
The same great Pitchfork, made for a 24" wheel. - Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 366 Steerer Tube Length (mm): 162.5 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.3
S & M Bikes Pitchfork w/990 - 14mm
$179.99
The same great Pitchfork, but with 990 mounts for you front brake guys. - Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 14mm Weight (lb): 2.3
S & M Bikes Pitchfork w/990 - 3/8
$179.99
The same great Pitchfork, but with 990 mounts for your front brake guys. - Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.3
S & M Bikes Pitchfork w/990 24
$179.99
The same great Pitchfork, but with 990 mounts for your front brake guys. - Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Steerer Tube Length (mm): 171mm Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.37
S & M Bikes Race XLT Fork 20
$179.99
This is for all you racers. A light but strong fork that will take the punishment any track can throw at it. Height (mm): 315.5 Steerer Tube Length (mm): 171 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: N/A Compression Bolt Tool: N/A Axle Slot: 3/8" Weight (lb): 1.9
S & M Bikes Tapered Pitchfork XLT - 3/8
$179.99
S&M took their classic Pitchfork and made it even better with the Tapered Pitchfork XLT. - Tapered legs - Integrated race Height (mm): 315 Steerer Tube Length (mm): 160 Offset (mm): 32 Bearing Race: Integrated Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 1.99
S & M Bikes Pitchfork 22
$199.99
FOR USE WITH 22" WHEELS AND OUR 22" HOLMES FRAME. Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.39 lb
S & M Bikes Pitchfork
$229.99 - $249.99
Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design is ready for more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it. And, it's available with your choice of 3/8-inch or 14mm axles.
S & M Bikes Hucker Frame - White
$342.99 $489.99 30% Savings
S&M Mike "Hucker" Clark Chromoly steel BMX frame in gloss white. - 4 lbs, 14 oz. - Super-Therm True Temper 4130 chromoly steel frame. - Gusseted top and down tubes w/ embossed logoing. - Seatstay brake mounts. - Glass white finish, w/ limited edition "Hucker" stickers.
S & M Bikes Profile Mini Cassette Hubset 3/8
$449.99
This is what happens when two legends of BMX collide. These limited edition sets are the Profile Mini hubsets with the timeless S&M shield logo anodized into the finish. These hubs have the same specs and performance as the original Mini hubs including 14mm Gun Drilled Hollow Chromoly rear axle with a 4 pawl chromoly driver and a 7075 T6 hollow front axle with female style bolts and profile flawless machined finish all around. You get profile’s reliability and performance with S&M’s style. Also available in Left-side-drive and in 3/8” rear axle. These are very limited so if you’re hovering over the “add to cart” button, best to click it now. FRONT Axle: Hollow Alloy Female Driver: N/A Driver Bearings: N/A Driver Pawls: N/A Driver Spring: N/A Hardware: 3/8" Bolts Hub Shell Bearings: 6903 (x2) Weight (oz): 8.2 REAR Axle: Gun Drilled Hollow Chromoly 14mm Driver: 1 pc. 9T Chromoly Driver Bearings: 6802 (x2) Driver Pawls: 4 Pawl Driver Spring: Individual (x4) Hardware: Chromo / Ti ADD ON Hub Shell Bearings: 6803 (x2) Weight (oz): 12.8
Page 1 of 1