|
This is how training reaches new levels. Our fluid and wind trainers have amazingly accurate power curves (power v speed). Combined with this Kinetic power computer, riders get accurate estimates of power output without a special hub, excess wires, or complicated gear calibration. It measures watts, so gear heads rely on it. Gear heads love it. Gear heads want it. Three-line display
Current power in watts*
Average power in watts*
Maximum power in watts*
Current speed
* Power output only accurate when riding trainer.
Average Speed
Maximum speed
Odometer / Total distance
Trip distance
Ride time
Total ride time
Clock
Auto on / Auto off
Sleep mode
The Kinetic Power Computer was designed to work with the Kinetic Road Machine. However, it is not limited to use only on Kurt trainers. Here's how it works:
The Kinetic PC operates on the principle that the Road Machine's resistance is speed sensitive and ONLY speed sensitive. Some people don't buy into that, but if you think about it, the only factor that has any impact on the resistance unit is how fast the roller is spinning - independent of rider weight, cadence, crank length, etc. After riding one of Kurts trainers, you are, no doubt, aware of a relationship between speed and effort. The faster you go, the harder it is to pedal. The beauty of the Kinetic Road Machine is that they have tweaked and studied this relationship to a further extent than any other company.
Kurt have used their test robot, Crank Armstrong, to analyze the forces experienced by a rider on our trainer. Specifically, they analyze the amount of wattage needed to sustain any given speed on our trainer. Once they got the data from Crank, they sent it over to Tom Compton at Analytic Cycling. He uses a computer program called Mathematica to fit the data to a mathematical formula. The end result is a very accurate power curve and a mathematical formula that describes it. The best-fit formula for the Kinetic Road Machine is in the form P = Ax + Bx3, where P is power in watts, x is speed in miles per hour, and A and B are constants. With this formula, they can calculate how many watts a rider is producing on a Kurt trainer if we know how fast the bike's wheel is turning.
The Kinetic PC has a rear wheel sensor that picks up speed off the rear wheel and then converts speed to power using the formula provided by Tom. The end result is an accurate estimation (+/- 3% of a PowerTap reading) using some very simple and inexpensive hardware.
The Kurt computer is not a strain gauge and does not measure torque, so there are a few things it will not do. Unlike the much more expensive PowerTap and SRM systems, Kurts computer will not register a spike in wattage prior to a sudden acceleration. With the computer, the wheel must turn faster before a higher wattage reading is observed. Likewise, the computer will register positive wattage while coasting even though no force is being applied to the pedals. Furthermore, wattage readings while not riding a trainer are obsolete because all those variables that are insignificant on a trainer (rider weight, cadence, crank length, etc.) are no longer controlled.
Trainer Compatibility
When Kurt designed the computer, they set it up so that the user can input A and B just like you would input wheel circumference in a traditional bike computer.
A few things are required to make a trainer compatible with the Kinetic Power Computer:
The resistance must be repeatable. If a trainer has any sort of knob, dial, or lever that allows the user to notch up or notch down the resistance, the trainer does not have a repeatable workload. Every time a user changes the resistance, the force curve changes, making all previous calibration obsolete.
The force curve must be linear or cubic in shape, meaning it is in the form of P = Ax or P = Ax + Bx3. The computer has the basic formula P = Ax + Bx3 built in. By changing A and B, one can alter the shape of the force curve to look more cubic or more linear. These A and B coefficients very closely related to the calibration numbers listed in the table linked above (calibration #A = A x 1000, calibration #B = B x 100,000, both are truncated to 4 digits). Most fluid and wind trainers fall under this category, but magnetic trainers rarely ever do. Fluid and wind trainers have nice cubic power curves, while magnetic trainers typically have bell or plateau shaped curves.
Every trainer has a unique power curve (it's like a trainer's fingerprint), so you might imagine that it's near impossible to fit some - and you'd be right. Some power curves are too radically different from a cubic or linear shape (meaning a formula in the form P = Ax + Bx3 does not do a good job of describing the power curve). Attempting to fit our computer to some of these curves results in poor accuracy.
Kinetic PC Calibration Numbers
Trainer Model A B Corresponding Formula
BlackBurn Fluid 9005 1000 9.00528x + 0.00999636x3
CycleOps Fluid 2 0747 4669 0.74715x + 0.0466912x3
Elite Fluid Alu 7113 0886 7.11346x + 0.00885877x3
Elite Volare 4660 1316 4.65979x + 0.0131627x3
Kinetic AC Pro 5245 1917 5.244820x + 0.01968x3
Kinetic Cyclone 6481 2011 6.48109x + 0.020106x3
Kinetic Standard Fluid 5245 1917 5.244820x + 0.01968x3
Kinetic Road Machine 5245 1917 5.244820x + 0.01968x3
PerformanceTravelTrac Century Fluid 4145 1217 4.145000x + 0.01217x3
Spinervals Super Fluid 4.5 5245 1917 5.244820x + 0.01968x3
|
|
