Fenders

Simple, clean design keeps everyone dry and is super easy to install on a wide variety of bikes. - Six-inch-long front and rear "shower curtain" courtesy flaps keep your feet dry and the mud out of the face of your fellow riders - Front fender stays are shaped to work around disc brake calipers - Safety breakaway hardware on front fender - Fit may vary depending on the tire/rim combination - Stainless steel mounting hardware, fender bridges, and fender stay clamps

An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four

Bikes have changed, and so should fenders! We threw traditional fender blueprints out the window and designed fenders that solve real problems and are as close to 'fit-everything' as possible.FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is avoided, and end of life plastic is kept out of landfills or incinerators. And because we're trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel.From a design side, the attractive matte finish has the look of alloy fenders, but none of the drawbacks. Dramatically increased length solves the problems of your feet getting wet up front, and your gear (and your riding partner) getting wet out back.Each set of fenders includes our proprietary AXLERUNNER™ and FRAMERUNNER™ mounts, and an expanded hardware assortment to ensure you will be able to fit fenders to almost any bicycle, even if your bike has disc brakes, suspension forks, or simply wasn't designed with provisions for fenders.Construction: FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware Mounting System: FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths Features: Matte finish has the look of alloy, but won't dent or bend, and has a more durable finish FLASCHEGUARD™ material retains all the strength and durability characteristics of regular polycarbonate Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3 M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty Wheel Size Compatibility: 26" / 650B Radius: 350 mm Profile width: 60 mm Tire Compatibility Range: 26 x 1.5 - 2.0" / 650B x 32 - 47 mm Smooth Front Fender Length: 750 mm / 29.5" Rear Fender Length: 1295 mm / 51" Weight: 720g

Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty

Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty

Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty

Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty

Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty

Axiom's Rainrunner DLX Reflex Road Fenders provide the best in rain and mud protection. They're made of super-durable Techniflex plastic that resists breakage even in sub-freezing conditions and there are extra-long mud flaps to keep you clean and on good terms with your riding buddies. They also feature gray-by-day, reflective-by-night 3M Reflex stripes to keep you safe and rustproof stainless-steel stays. Plus, adapters to mount the fenders on bikes with disc brakes and bikes without eyelets are included.

Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 652 g / 1.44 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 752 g / 1.66 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 606 g / 1.34 lbs (pair) Construction -Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System Below: Mount to Quick-Release skewers via included AXLE-RUNNERS Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

Axiom's Roadrunner LX Reflex Fenders are made of super-durable Techniflex plastic that resists breakage even in sub-freezing conditions. Their mud flaps keep you clean and the gray by day, reflective by night 3M Reflex strips keep you safe. And, they also feature sturdy, easy-to-install stainless steel stays.

Easy to mount, no tools required Fits almost all bikes Super lightweight, only 50 grams Suitable for tire widths between 23-35 mm Made in Sweden The all new FENDOR BENDOR Regular is a great option for those truly wet moments when you wish you had a fully protecting mudguard. It attaches with no tools, to virtually every bike in just a few seconds. Still foldable, it can easily be stored in a bag or jersey pocket for wet weather deployment. Universal fit With the newly developed attachment construction, FENDOR BENDOR Regular is now completely self supported and therefore possible to mount on bikes without the sideway support of the seat stays or the support of a brake bridge. You could also mount it above your caliper brake to avoid interference with the brake. For streets and roads The FENDOR BENDOR Regular has been adapted to fit the smaller and more delicate tubing of road and urban bikes. It has a slightly slimmer profile than its predecessor that will look at home on everything from your vintage track bike to your hyper modern carbon road bike. It remains folded in two places to keep the compact folded state of the previous generation that easily slips into a jersey pocket or backpack.

Win Wing 2 is here! Stronger, gentler and darker, the fastest clip-on gravel mudguard on the market just got even better! The Win Wing 2 Gravel fits practically any gravel bike, protecting the rider in even the worst conditions. No matter the terrain, on-road or off, the Win Wing won't rattle or jam, and with only 72g, you won't even notice it's there. Full backside rider protection from the knee and up Reinforced patent pending wishbone technology Attaches in seconds to every bike, requires no tools Including frame protection stickers Suitable for tire widths up to 60 mm The Black Dot design is the understated, yet refined version of the popular rear fender. The Detour version is the epic adventure companion making sure your gone wrongs are done right! The Golden Grove pattern visually vibrates with good feels! The Spektrum is designed to always match your bike color, no matter what. Let out the Unicorn within! Together with SQUID Bikes, we developed the industry's first detergent generated fender design in a never-to-be-unseen power-purple!

- Light, discrete and durable polypropylene mudguard for Fat and Plus size bikes - Universal mount, fits rigid and suspension forks - 286 x 300mm - 48g

- Compatible with 16'' and 20'' wheels - Front: T steel plate mounting system - Rear: Clip with built in L shape bracket - Blade width: 55mm

- Design for road bikes - Installation and angle adjustment without tools - Made of ultra-resistant black polymer resin - Mounts onto the seat post - Blade width: 45 mm

- Versatile mini fenders work with almost any casual bike - The #80 fits tire widths of 1.25-1.375" - Single splash guard

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65

Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Topeak's DeFender M1/M2 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC11 fender. It uses unique quick-release mounting system that makes installation a snap and it's made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. There are pivot points that make it compatible with nearly any size bike or tire. The underside is highly polished so grime doesn't stick and, it accommodates tires up to 700 x 25c in size.

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams

The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) - Weight: 192 grams (Front); 245 grams (Rear)

Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Topeak's DeFender XC1/XC11 Set offers durable rain and mud protection for your 26-inch wheeled bike. They're incredibly light and easy-to-use, too. Extra clearance makes the XC1 perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachments allows them to be installed and removed in seconds. The rear uses a quick-release seatpost attachment and the angle is adjustable for the perfect fit.

Topeak's DeFender XC11 for 27.5-inch wheel bikes is a rear fender that offers durable rain and mud protection on wet and sloppy rides. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit. It's incredibly light, too.

Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

Topeak's DeFender iGlow TX combines a compact trekking bike fender set with Integral Glow (iGlow) illumination technology for safety at night and low visibility conditions. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender iGlow TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Brake bolt and fork eyelets attachment (front); Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - Lamp: 0.5W super bright white (front) / red (rear) LED - Battery: CR2032 x 4 (included) - Weight: 220 grams (Front); 278 grams (Rear)

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

The DRY-TECH fender set is an engineered fender set with extended, research-based length for superior water protection. The fenders are made of a lightweight, yet highly durable multi-material design. It's also been engineered in Specialized's very own Win Tunnel in order to improve protection and to minimize water spray. The fenders are available in three different sizes (35, 45, and 52mm), and they're designed to work on bikes with 700C wheels—with or without Specialized Plug + Play frame mounting. Lastly, for a finishing touch, the fenders include heat-treated, lightweight aluminum fender stays with stainless steel hardware. - Engineered fender set with extended, research-based length for superior water protection. - Lightweight, yet highly durable multi-material design. - Engineered in Specialized's Win Tunnel to improve protection and minimize water spra.y - Designed to work on bikes with 700C wheels and with or without Specialized Plug + Play frame mounting. - Heat-treated, lightweight aluminum fender stays with stainless steel hardware.

Keep the road grime off your clothes, and arrive in style, with a durable fender set made specifically for the Turbo Como. It's all dry roads from here. - Durable fender set that's specifically designed to fit the Turbo Como. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and specific alloy hardware ensure the perfect fit for your Turbo Como. - Front fender supports Plug + Play mounting. - Front Length: 790mm - Rear Length: 1180mm

Gravel away in rain, show, sleet or shine. The new RockShox premium short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at 3-bolt mounts and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts ensures secure attachment - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all Rudy XPLR models

- Adapts to 24'' or 26'' wheels - Made of shock resistant polymer

- Can be used on 24'' or 26'' wheels - Designed specially for use with V-brakes and bike with suspension - Mounting kit included - Adjustable L shape steel bracket for rear and front mudguard - Made of shock resistant polymer - 100% recyclable material - Reflective safety stickers mounting

- Fits tubes from Ø27 to 35mm - Fits 26" to 29" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included

- Fits tubes from Ø27 to 35mm - Fits 20" to 24" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - Mounting kit included

- Adapts to 700C wheels - Made of shock resistant polymer

Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.

- Technopolymer construction - Durable and weatherproof material - Fits most front forks - Zip ties included

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details: - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details; - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details: - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

FUNCTIONAL. FASHIONABLE. FENDERS. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. PRODUCT DETAILS - Original replacement fenders for Electra Townie bikes - Color matched for direct compatibility

Versatile, flexible, front fender for mountain bikes. Fits virtually any fork with arch in front and any tire diameter with width up to 3.0". - Slop Stop - The Slop Stop leading edge catches mud and water the tire picks up and flings forward. Catching this slop at the tire helps prevent it from getting blown into your face! - Seal Shield - The Seal Shield drop section wings provide an effective barrier to trail debris and muck, helping keep your fork seals cleaner longer. - Flop Stop - The Flop Stop rear section's carefully engineered fold provide stiffness. This stiffness prevents the fender from contacting the front wheel and getting sucked into the fork, stopping you in a hurry! The folds also contour the fender around the tire making it a better mud guard. - Includes 4 reusable zip ties - Weight: 27g

Mountain Bike Mud Fender Keep the crud off your frame with the Fox Mudguard. Designed to fit multiple mountain bike fork and wheel sizes, the Mudguard is an essential accessory for MTB riding in wet conditions. Universal design fits most current mountain bike forks 100% polyurethane

The All-City Ass Savers foldable fender hides under your saddle till you need it, then when it rains, you just unfurl it and go. Or if you don't want to have it tucked under your seat, just let it ride in your backpack. It's flat, doesn't take up much space and can really come in handy. 100% recyclable polypropylene Keeps your butt dry on wet roads Easy to mount, requires no tools