Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Stages Cycling Seat Mast for SB20
$415.79
Have another rider in your household who prefers a different saddle? Grab a second seat mast and swap them out in seconds between rides. With 335mm of height adjustment, 80mm of fore/aft adjustment and permanent laser-etched scales, it's quick and easy to dial in your precise fit every time. - Universal saddle clamp works with most saddle rail designs - Saddle not included
Stages Cycling Remote Shifters
$259.99
These remote "sprint" shifter pods can be added to the tops of a standard road bar as climbing shifters or used with aero bar extensions for an additional shift position. Each pod has two buttons and can be configured via the Stages LINK app device manager. - Compatible with the StagesBike SB20 Smart Bike only - 350mm wiring harness length
Tacx Direct Drive Freehub Body, 2020
$158.99
- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers - NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)
Tacx Trainer Bag
$139.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
Elite Training Mat
$115.99
The Training Mat is the finishing touch to your training area. Placed between the home trainer and the floor, it improves comfort and protects your home from oil, dirt, and sweat. Plus, it limits the noise produced by training, especially on wooden floors. - Easy to roll up and store away - Dampens vibrations - Easy to clean - Length: 1800mm - Width 900mm
Wahoo RPM Speed/Cadence Sensor Combo Pack (BT/ANT+)
$114.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Saris Training Mat
$109.99
Protects your floor from sweat and bike grime. Keeps your trainer from "walking" during intense workouts. Durable construction absorbs vibration and noise. Training mat measures 65 x 36 inches. Black PVC foam gives the training mat superior sound absorption. Resistant to moisture, and easy to clean with soap and water when necessary.
Robert Axle Project Trainer Thru Axle
$106.50 - $106.99
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Elite Misuro B+ Sensor
$104.99
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
Minoura ANT+ Speed/Cadence sensor (SPD/CD Separate type)
$104.99
Minoura Training Accessories like the ANT+ Minoura Speed/Cadence sensor (SPD/CD Separate type) are a fantastic complement to your favorite trainer or roller. - Pickup and transmit the speed and cadence data - Separate type - Low energy ANT+ wireless protocol - Minoura is an official ANT+ Alliance Member - Universal on every ANT+ device
Wahoo KICKR Trainer Floormat
$103.99
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.
Wahoo Campy Freehub Adapter for Kickr
$100.99
• This freehub makes your KICKR compatible with Campagnolo 9, 10, and 11 speed cassettes • Installation is required • Campagnolo Cassette and Lock Ring are not included • Installation Note: Please view the installation video on YouTube to ensure you have all of the proper tools before purchasing • If you do not want to perform the installation yourself, your local bike shop will have the tools and the know-how to get you up and running with Campy • The black, rubber dust seal mentioned in the video is no longer in use. Please install the Campagnolo freehub without this dust seal ***Please be advised: The optional KICKR Campy freehub Body is not compatible with the 2017 KICKR (only the 2 previous models of KICKR's are compatible with the KICKR Campy FHB). Since the spacing is the same, 11 speed Campy users can use the standard KICKR 11 speed cassette. However, a Campy cassette cannot be added to the standard KICKR freehub body (since the splines are different). For 10 speed Campy users (with the 2017 KICKR), you would need to purchase a 3rd party cassette, such as the following example http://www.ambrosio.co.uk/ambrosio_cassettes.htm (this cassette will fit the standard 2017 KICKR freehub body).
Minoura ANT+ Minoura Heart Rate Monitor With Belt
$99.99
Minoura Training Accessories like the ANT+ Minoura Heart Rate monitor with belt is a fantastic complement to your favorite trainer or roller. - Pickup and transmit your heart rate data with a comfortable fit - Low energy ANT + (2.4GHz) wireless protocol - Minoura is an official ANT + Alliance member - Universal on every ANT + device - Net Weight: 67 grams (including battery) - Battery: 1 x CR2032
Tacx Rollable Trainer Mat
$99.99
- Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm
Tacx Direct Drive Thru-Axle Adapter
$95.99
- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.
Elite Freehub SRAM XD/XDR
$94.99
- Sram XD and XDR freehub for Direct Drive trainers (Drivo and Direto's family, Suito, Turno, Kura, Turbo Roteo and Volano). - Compatible with 12 speed cassette.
Tacx Direct Drive Quick Release with Adapter Set
$84.99 - $94.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
Stages Cycling SB20 Stages Saddle
$92.99
Designed to provide hundreds of hours of indoor cycling comfort, the contemporary short-nose saddle shape with ergonomic cutout reduces pressure on sensitive areas. Ride-tuned MCU foam density provides the optimal amount of padding—not too soft, not too firm. - Traditional CrMo rail design - Seat Mast not included
Elite Freehub Campagnolo
$89.99
This freehub body replaces the one that comes with your Elite direct drive trainer, and it makes the trainer compatible with 9/10/11-speed Campagnolo cassettes. Works with the following Elite trainers: - Kura - Direto - Direto X - Suito - Drivo - Drivo II
Tacx Direct Drive Freehub Body, Campagnolo
$89.99
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
Tacx USB ANT+ Antenna
$89.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Feedback Sports Floor Mat
$79.99
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party! - Non-slip surface keep you safe while in cycling cleats - Protects floors from sweat and bike grime - Water-repellent surface does what it was designed to do – keep sweat off your floor - Compress-ability ensures trainer stays put during intense efforts - Easily rolls up for storage - Cleans easily with soap and water - Absorbs noise and vibration - Enhances overall stability of any indoor trainer setup - 4mm (5/32?) thickness is optimal balance of support and storage
Saris 148X12 Boost Thru Axle Adapter
$79.99
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
Saris 148x12 Trainer Thru Axle Adapter
$79.99
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
Tacx Bracket for Tablets
$79.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Blackburn Trainer & Trailer Adapter Kit
$74.99
Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru-axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging or by matching to one of the brands listed below: - RockShox Maxle - 1.75mm thread pitch - Syntace X-12 - 1.0mm thread pitch - DT x-12 - 1.0mm thread pitch - Shimano E-Thru - 1.5mm thread pitch - DT E-Thru - 1.5mm thread pitch
Kinetic 12mm Traxle Through-Axle
$65.99 - $74.99
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. The Kinetic Traxle comes in 3 thread pitches: - T-2101 Coarse: M12 x 1.75mm - T-2102 Medium: M12 x 1.5 - T-2100 Fine: M12 x 1.00mm (Fine XL has the same thread pitch and is a longer version of the fine Traxle)
Saris 142x12 Trainer Thru Axle Adapter
$69.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Saris ANT+ USB Adapter for PC
$69.99
Connect your PC to CycleOps VirtualTraining.
Saris Trainer Tire
$69.99
Save Your Tires for Race Day Frequent trainer riders often find the tread on their rear wheel will wear down over time. We recommend using our trainer tires on our Saris indoor trainers. They are made of tough material that can stand up to hours and hours and hours of training. Product Features - 700c x 23 – 25 fits most road bikes. - Ultra-quiet and super-durable. - For use with an indoor trainer only.
Page 1 of 2 Next page