Filter By:
Parts & Accessories
$1.99
A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.
$5.49
The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!
$5.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$5.99
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
$6.99
Rebuild seal kit for the Lezyne HP Floor Drives (CNC, Alloy, Classic, Steel, Sport). Kit includes a replacement swivel and a piston seal o-ring.
$6.99
- Replacement rubber caps for HP / HV / alloy / pressure / road drive pumps
- Sold as a pair
$7.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
$9.99
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
$9.99
Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.
$9.99
For all of the following models:
- Carbon Drive
- Alloy Drive
- Tech Drive HV
- HV Drive
- Sport Drive HV
- Micro Floor Drive HV
- Micro Floor Drive HVG
- Swivel Drive HV
$9.99
A rebuild seal kit for the following Lezyne hand pumps:
- Road Drive
- Carbon Road Drive
$9.99
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
$9.99
Rebuild kit for the HP floor pump.
- Compatible with Air Tool HP floor pump.
- Includes O-ring, lube, and grommet.
$10.00
Rebuild kit for the MTB floor pump.
- Compatible with Air Tool MTB floor pump.
- Includes O-ring, lube, and grommet.
$10.00
Rebuild kit for our most common Air Tool floor pumps.
- Compatible with Air Tool Pro, Comp, and Sport floor pumps.
- Includes O-ring lube and grommet.
$14.99 - $15.99
Replacement CNC-machined aluminum pump mount for all Road Drive and Carbon Road Drive pumps. Includes Velcro pump strap.
$14.99
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
$16.99
160 PSI replacement analog pressure gauge for all standard travel floor pumps; includes glue and O-ring. With a 1.5-inch face, this gauge increases visibility and allows a precise measurement of tire pressure.
$19.99
- Replacement ABS Flex Hose for Lezyne hand pumps
- Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps
$19.99
- Replacement ABS Flex Hose for all Pocket Drive pumps
- Presta & Schrader compatible
$19.99
Direct replacement head and hose for Comp MTB and HP floor pumps. Also works with Sport floor pump.
- Replacement head and hose for most Air Tool floor pumps.
- Compatible with Air Tool MTB, Comp, HP, and Sport floor pumps.
$24.99
220 PSI replacement analog pressure gauge for all standard floor pumps, includes glue and o-ring. Highly precise with an oversized 2.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires.
$24.99
220 PSI replacement analog pressure gauge for 2014 and later models of Alloy, CNC, and Classic pumps, includes glue and o-ring. Highly precise with an oversized 3.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires. Included on our CNC, Alloy, and Classic floor drives.
$24.99
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
$32.99
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
$36.99
Lezyne's ABS Pen Gauge is a replacement flex hose with an integrated, in-line psi/bar pressure gauge with easy to read markings. It is stored inside the handle of Flex Hose equipped Lezyne hand pumps (Medium and Large sizes only, sold separately), and is equipped with the ABS Flip Thread Chuck which threads onto Presta and Schrader valves for a secure connection.
$39.99
- Nylon braided hose includes an ABS1 Pro chuck
- Compatible with all high-pressure floor pumps.
$39.99
Replacement or upgrade for the Micro Floor Drive Pump. ABS chuck and inline pen gauge. Compatible with all Micro Floor Drive Pumps.
Page 1 of 2
Next page