650B

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

LIGHTER, GRIPPIER, FASTER. The ‘turbo’ of spike tires. With up to 402 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The tire remains agile and sporty. Brand new studded tires must be ridden around 40km on asphalt roads without heavy acceleration and braking. This 'bed-in period' will ensure studs are fully set, after which, the studded tires can be used normally. - Lighter, grippier, faster - The ''Turbo'' of spike tires - Agile and sporty - Please note, in order to ensure that spikes are permanently fixed, tires should be run in for about 40km (25 miles) on asphalt, while avoiding any fast acceleration or heavy braking.

The ‘turbo’ of spike tires. With 361 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The scales stop at 695 g, yet the tire remains agile and sporty. - LiteSkin: The lightest option. LiteSkin MTB tires forego SnakeSkin, but still have high pressure resistant tire beads. If you don't mind the extra effort, these tires can also be converted to Tubeless by using a liquid sealant. - Winter compound - Folding bead

From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - 252 carbide aluminum studs - Directional lugs provide low rolling resistance while offering excellent braking traction - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Versatile and confidence inspiring, the Gravdal securely navigates through harsh winter conditions with concave carbide studs for added traction in icy conditions. - Siping creates a more conforming lug for added traction - Concave carbide studs provide traction in the iciest conditions - Reflective strip on sidewall makes you more visible when riding in low-light conditions - Fits most bikes with cantilever or disc brakes

Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy. - 120 TPI tubeless-ready casing - Ramped center lugs for rolling efficiency - Aggressively siping for grip - Shovel-design side lugs for predictable braking and cornering - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Guaranteed Grip and Control In All Situations - Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control - Literally sticks to the ground as the tire deforms more precisely - Tread Pattern optimized for radial carcass: Many lugs for maximum grip and great durability - Control in all situations

The Shredda Rear tire was designed for the steepest uphill passages. A new Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control to keep you on the trail. - Radial carcass allows for a larger contact area: more grip, more comfort, and more control - Almost sucks itself to the ground because the tire deforms so precisely - Slightly shallower tread depth than Shredda Front, but more stable profile optimized for radial carcass: Open tread design with scooping effect and high tread depth for excellent interlocking - Especially on soft surfaces, it generates a lot of braking and propulsion traction

The fastest downhill tire in the world! - Developed over two years in the World Cup races, including with DH overall World cup winner Amaury Pierron - Optimized 100% for precision - For even more aggressive cornering, shoulder lugs are 10% more stable compared to the Magic Mary - Long braking edges allow later braking point - Open shoulder area provides direct feedback and improves self-cleaning - Ramps on center lugs for optimal rolling characteristics - Evolution line, Super Downhill construction - Addix Ultra Soft compound - ECE: E-50 - 1320g

Big Betty is back! Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with our much-loved Magic Mary. - Long supported braking edges for maximum braking traction - Extremely stable shoulder blocks for outstanding cornering grip - Open and aggressive tread for excellent grip and self-cleaning - Evolution line, NEW Super Gravity construction - Addix Soft compound - ECE: E-50 - 1330g

- Don’t let the name fool you, this big-time influencer has a knob pattern based on our successful trail bike design but with a meatier fat bike carcass. - It performs equally amazing in both cold and warm weather terrain when you want to just go fast. - An open, aggressive tread pattern is designed to get you through snow, mud, rocks and anything else you want to conquer with confidence and poise.

Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with the much-loved Magic Mary. - Long supported braking edges for maximum braking traction - Extremely stable shoulder blocks for outstanding cornering grip - Open and aggressive tread for excellent grip and self-cleaning

Hans Dampf has everything to increase enduro fun. Choose it for stunning handling and the highest puncture protection on demanding trails—ascent as well as descent. - Precisely tuned stud positioning for controlled and forgiving riding at the limit - The combination of large and small shoulder studs grants the rider optimal grip in numerous conditions - Semi-open blocks ensure optimal self-cleaning properties with low rolling resistance

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground Specs: - Tire Diameter/ISO: 29''/622 - 67 TPI - Bead: Folding - Tire Type: Tubeless Ready - Tubeless Technology: Tubeless Easy

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The second generation of the legendary High Roller - Easily clears debris - Open tread design - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, loose terrain.

The legendary High Roller returns with an all-new hybrid tread design, built to take on mixed conditions at high speeds. The center tread uses a mid-spike design similar to the Shorty but with a lower knob height. These knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces. Cornering traction is enhanced via large, well-supported side knobs for predictable handling. - Recommended for intermediate enduro and downhill conditions - Tubeless ready construction, designed for front or rear use - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - Widely-spaced tread of the High Roller clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - 3C MaxxGrip + Downhill casing is ideal for Downhill racing and long travel e-bikes - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium Compounds: - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - 3C MaxxTerra is an intermediate triple compound that provides additional grip but still retains excellent tread wear and rolling resistance qualities - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

- The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering. - The reference in Downhill and Trail tires - Front specific design, but the DHF also makes an excellent option for a rear tire, with its balanced driving, braking, and cornering traction - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing