Skip to main content

Orbea Occam M LTD

Orbea Occam M LTD
This item is currently not available.

Details

ARE YOU THIS RIDER?
Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike.

Suspension
Modern trail bikes are used for an impressive variety of rides. Some riders use them to climb thousands of meters on huge rides, others weave in and out of bike parks and jumps during their daily adventures. Occam is available with either a 140mm Fox 34 or 150mm Fox 36 so you can ride the way you like.

Trail Geometry
- Slacker Head Angle: Great stability
- Lower Bottom Bracket: Corners naturally
- Longer Cockpit: Room to move while maintaining balance
- Longer Wheelbase: Stability at high speeds
- Steep Seat Angle: Proper pedaling position
- Short Seat Tube: For long dropper posts

Carbon OMR
- Orbea Monocoque Race (OMR) frames blend high modulus fibers and high strength fibers exclusively.
- Prepreg carbon sheets are laser cut to minimize excess materials and overlap, and hours of pre-molding ensure optimal compaction with the smallest amount of carbon.
- A full EPS (Expanded Polystyrene) mold helps eliminate wrinkles and voids.

Asymmetry—Strength
- The right side support strengthens and stiffens a high-stress area.
- Instead of using a less-efficient "shock tunnel" the Occam design offsets the shock to the left side of the frame, allowing the asymmetrical support to follow a more direct path.
- This straight line that closely follows the shock mounting is the most efficient way to neutralize suspension forces on the front triangle.

Asymmetry—Ergonomics & Balance
- The asymmetric/offset design offers unique advantages beyond stiffness and low weight. The shock is mounted in a position that offers incredibly easy access to damper controls, while the tidy design leaves room for a bottle with easy left-side access.

Specs

Frame Orbea Occam OMR 2020 140mm travel 29" C-Boost 12x148
Fork Fox 36 Float Factory 150 Grip2 QR15x110 Kashima
Headset Acros Alloy 1-1/8 - 1-1/2" Integrated
Axles Front: 110 x 15mm thru-axle
Rear: 148 x 12mm thru-axle
Rims/Wheels Race Face NEXT-R31 TLR 15/110mm IS
Tires Front: Maxxis High Roller II 29 x 2.50" FB 60 TPI Dual Exo TR
Rear: Maxxis Rekon 29 x 2.40" FB 60 TPI Dual Exo TR
Crankset Race Face Next-R 32t
Chain Shimano CN-9100
Rear Derailleur Shimano XTR M9100 SGS Shadow Plus
Cassette/Rear Cogs Shimano XTR M9100 10-51t 12-Speed
Shifters Shimano XTR M9100
Handlebars Race Face Next R 35 20mm Rise 780mm
Stem Race Face Turbine R 35mm interface
Brakes Shimano XTR M9120Hydraulic Disc
Pedals Sold separately
Saddle Fizik Taiga Kium rail
Seat Post Fox Transfer Factory Kashima Dropper 31.6x418,3/150mm (Internal routing)
Accessories & Extras Orbea OC chainguide
Shimano MT-800 I-Spec EV remote lockout

* Subject to change without notice.

Videos