Stems

3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)

A stem may not seem like the most exciting bike part, but it's in our DNA to care about it in great detail. After all, no other part has such a dramatic effect on your riding position and thus your speed, comfort, and enjoyment. With the APTO, 60 years of innovation and elegance in 3T stem design comes together in a moving sculpture. Steerer Clamp: Double bolts hold the steerer securely and provide redundancy for extra safety. Reverse Faceplate Bolts: These clean up the faceplate for a more elegant design, particularly in combination with our new drop bars. Classic Rubber Logo: The 3D rubber logo is a nod to the iconic 3T stems of yesteryear. - Material: Alloy 6061 - Steerer diameter: 28.6mm (1 1/8") - Handlebar diameter: 31.8mm - Key size: 4mm Allen key - Steerer bolt torque: 5Nm - Faceplate bolt torque: 5Nm

Lightweight and durable stem. - Extra-long 220mm shaft for maximum height adjustment - Lightweight alloy head with strong steel shaft - High rise for improved riding comfort - Fits 25.4mm handlebars - 30 degree rise

Lightweight and durable forged alloy stem. - Removable faceplate for easy bar installation - 30 degree rise - Fits 25.4mm handlebars

Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation

Lightweight and durable 2D forged-alloy stem. - Removable faceplate for easy bar installation - 4-bolt clamp for optimal handlebar support - High rise for improved riding comfort - 35 degree rise

3D forged 6061-T6 Aluminum. - Excellent value and performance - A great way to try a few different stems - Suitable for Road or XC MTB - Sand-blasted black finish - + / - 7 degree - 1-1/8" steerer, 31.8 mm bar clamp

Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation. - 180mm quill length.

3D forged 6061-T6 Aluminum. - Excellent value and performance - A great way to try a few different stem lengths to dial in fit - Sand-blasted black finish - 0 degree - 1-1/8" steerer, 31.8mm bar clamp - 135 grams (55mm)

3D Forged 6061-T6 alloy. - Strong, stiff and light - Rugged design can handle the demands of today's All-Mountain rider - Low stack height - 31.8 Bar clamp, 0 rise - 150g (45mm length)

Reduced weight and improved looks over traditional adjustable stems. - Provides 6 different angles by using the supplied shims and flipping the stem (+16, +12, +8, -8, -12, -16) - 172g 100mm length with one shim and top cap - Stylish bead blast black finish - 1-1/8 steerer, 31.8mm bar clamp

eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm

Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height

Strong, light and elegant. Chromag's longest running stem, the Ranger, has a refined body shape that represents their own advancement in 3D modelling and CNC profiling. The Ranger is stronger and stiffer for today’s increased demands with blended body features to increase performance with a more fluid look. The Ranger evolves with the same physical fundamentals, more flow, and increased strength. Starting at 140g, the Ranger is light yet extremely stiff for positive control at the front end.

STEM EXTENDER - Raises the height of the handlebar on a threadless stem - Lightweight strong Aluminum - Height gain: 50-80mm - 28.6mm - Black *It is possible that you may need longer brake and gear cables (housings as well) when raising the height of the handlebars. Your current cables and housings may not reach to the new height.

The Cavity stem was developed with pain staking focus on strength, function and attention to detail. Tapered body for cleaner lines and weight reduction, multiple internal and external machining processes to reduce every gram possible and chamfered edges throughout for stunning detail.

Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform

Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform

Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform

With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.

Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.

Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy

- Multi-position stem to fine tune your riding position - 3D forged 6061-T6 aluminum - 4-bolt oversized handlebar interface - Includes top cap and angle adjustment shims (2)

- Lightweight aluminum construction - Adjusts from 0° to 60° - 25.4mm handlebar clamp - 475g

- 3D forged alloy construction - Fits 1-1/8 (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- 3D forged alloy construction - Fits 1-1/8 (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)

- Forged alloy adjustable stem - Adjusts from 0° to 50° - 370g

- Forged alloy construction - Adjusts from 0 to +/- 60° - 31.8mm, shims included to fit 25.4mm handlebar

FSA ACR (Aerodynamic Cable Routing) Stems have a low-profile frontal area that is suitable for road and gravel riding. - Aerodynamic Cable Routing (ACR) - Low-profile frontal area - No rotation limit - Body and faceplate - 6061 T6 - Chromoly hardware - Specific frame and headset required - 31.8mm handlebar clamp diameter - 30mm fork clamp stack height - Compatible with: K-Force Light ACR Compact, SL-K ACR Compact, Energy ACR Compact, K-Wing AGX and K-Wing AGX handlebars

- 3D forged 6061 aluminum alloy body with oversize box cross-section - 46mm wide 6061 alloy faceplate - Steel hardware - Not OD2, regular 1-1/8"

- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - 1-1/8" steerer adapter included

- Stiff, ultra-light, full-composite oversize box-section increases torsional stiffness with tuned vertical compliance - 46mm wide alloy faceplate - Titanium hardware - Recessed top cap and semi-integrated spacer maximizes stem to steerer contact - ± 8° rise requires fewer spacers - 1-1/8-inch adaptor included

Aero Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon

LOOK Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon

Comes with an integrated computer mount

Orbea’s aluminium OC ICR01 Stem is intended for use on models which use internal cabling. A lower internal cabling cover is included to keep the cables tucked neatly out of the wind and it fits handlebars with a 31.8mm diameter. ICR01 road stem for internal cabling Included lower internal cabling cover (size specific) Top cap not included 31.8mm handlebar compatible Material: Aluminium

Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp

The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

- Fully CNC machined - Featuring an oversize center bore - Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight

- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts

- CNC machined 6082 aluminum body - 7075 aluminum clamps - Unique 240-deg C-shape clamps - Minimal 6-bolt design - U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems - Ultra-wide 64mm clamp width

Ritchey's Comp 4-Axis Stem has an easily adjustable system that continues to outperform the competition. Proven time after time again to be reliable, the 4-Axis stem is a sure-fire go-to for an entry level stem that has world class performance. (31.8MM) (70MM) (6°) Features: 4-Axis technology with wider faceplate (44mm) and wider bolt stance Squared body 3D net forged 2014 aluminum for Road or Mountain use Contoured clamp, 4-bolt pinch prevents crushing lightweight bars Bias-cut steerer clamp prevents damage to lightweight steerers Stem bolts should be tightened to 5Nm max

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

Designed specifically for 1-1/8" steerer.

The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 31.8mm bar clamp - 28.6mm stem clamp - 40mm stack height - Bead-blasted, then anodized, finish

High rise design with STC (Shark Tooth Clamping) inside the stem to help grip the bars. Central bore for reduced weight, unique side pocket detail. - 6061-T6 alloy - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.61 - Stem Type: Front Load

- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos

- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike

- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos

- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars

Dial your fit with this Direct Mount alloy stem with adjustable reach and height to achieve the ideal stance and balance point - Chamfered bar-clamp zones to reduce stress risers and improve fatigue life of handlebars - CNC weight optimized for 31.8 bars - 2D forged, shot peened and anodized for high strength and low weight - A Snap Fit top cap and laser logos for a refined finish - Recommended for: ASTM 5, All mountain, DH, free ride - LENGTH (mm): 25-30 (adjustable) - RISE: 28-33 (adjustable) - DIAMETER (mm): 31.8 - STACK HEIGHT (mm): n/a - WEIGHT ± (g): 130 - TECHNOLOGIES: Adjustable length/rise, chamfered bar clamp - MATERIAL: 2D forged MGR alloy, CNC weight optimized

- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized

- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life Features: - Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included - Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate - Rise (°): 0 - Diameter: 31.8mm - Stack Height: 34mm - Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm) - Finish: Shotpeen anodized

Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.

The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. - 3D-forged and CNC-machined 6061 alloy construction - 4-bolt oversized 31.8mm handlebar interface with relieved faceplate - Compatible with carbon composite handlebars

3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.

The Control Stem is tailor-made with a 35mm clamp to partner with the Control SL bar, delivering more stiffness and more control—coming in at an incredibly light 100g (50mm). Turns out, you can have it all. LIGHT: Where light weight and stiffness meet. Its high-quality 7075 Alloy and Ti hardware and featherweight function make the Control SL Stem a perfect match for race-day setups. STIFF: Made with the same integrity as the suite of stiff Roval components, the Control SL provides race-ready rigidity allowing for precision on the bike. FIT: With six lengths to choose from and 6 degrees of rise, you know you'll find your perfect fit. - Material: 3D-forged and CNC-machined, 7075 aluminum - Bolts: Titanium - Length: 50mm, 60mm, 70mm, 80mm, 90mm, 100mm - Rise: 6 degree rise - Weight: 100g (at 50mm), 130g (at 100mm) - Clamp Diameter: 35mm - Clamp Height: 40mm - Steerer Tube: 1-1/8"