Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Fenders
$29.99
- Compatible with 26’’, 27.5’’ and 29’’ forks
- 3.1'' wide, enough for most MTBs
- 360mm length offers good mud protection
- Made of techno-polymer resin
- Fixation on the front fork with 7 zip-ties or 4 Velcro
- 3 sets of stickers included to customize to your taste
- Weight: 110 g
$31.99
- Designed for 26'', 27.5'' & 29'' Mtn bikes
- Easy to install and fit perfectly on your bike
- Made of ultra-resistant techno polymer resin
- Mounts onto 25 to 32 mm seat posts
- Weight: 220 g
$27.00 - $39.99
Long "buddy" flaps are used to keep road grime and water off the faces of riders behind you - a necessity during brevets.
These long fender mud flaps are cut from 13-15 ounce Wickett & Craig fine harness leather. The leather is oiled for durability and long life and won't wrinkle like other flaps made of too thin leather. They're 24.5cm long and 11.5cm at the widest.
Price is per flap. Recommended for fenders 45mm and wider. Includes mounting hardware.
Made in Annapolis, Maryland.
$69.99
Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride.
- Valuable and durable plastic fender set for Roll.
- Designed for 650b x 2.3" tires.
- Stainless steel fender stays and hardware.
- Rear fender supports Plug and Play frame mounting.
- Front: 660mm / Rear: 1050mm
$399.99
Maximize the capability of your Tero with the Tero Equipment Kit. The kit is designed to complement a non-equipped Tero with racks, fenders, and integrated lights. Turn your Tero into a pack mule, a freight train, or whatever you need for your greatest adventures.
- Includes DRYTECH fenders, integrated front and rear LED lights, and rear rack.
- Rear rack has a 27kg capacity and is compatible with all MIK and MIK HD accessories, including child seats and the MIK adapter plate. Unique design allows for use of most standard panniers and platform accessories at the same time.
- Integrated front and rear LED lights are powered by the bike’s internal system and do not require batteries or charging. The headlight is the Lezyne E-Bike Mini STVZO E65 (210 - Lumen, 12V), and the taillight is the Spanninga Commuter Glow XE (12V).
- DRYTECH fenders are engineered in our Win Tunnel to improve protection and minimize water spray.
- Compatible with all non-equipped Tero models and sizes. Compatible with tires up to 29x2.35.
*Assembly by Authorized Specialized Retailer required, installation fees will apply. Available via pick-up in-store only.
$92.70 - $111.00
The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.
$55.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible
$127.50
The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers.
- Rear fender expands for custom fit
- Rubber fasteners mount to a variety of frame styles
$55.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible
$19.99
- A universal, quick-mount rear mudguard, that fits all seatpost diameters (25 to 32mm)
- Quick and easy to install
- Tool-free
- Reflective safety stickers
- Shock-resistant polymer
- 100% recyclable material
$13.99
- Universal mounting on downtube
- Easy assembly by rubber straps
- Dual injection construction with polypropylene and rubber
- Larger protection
$21.99
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use.
- Length: 370mm (14.5")
- Weight: 60g (2.1oz)
$59.99
STAY DRY FOR THE LONG HAUL. Keep water, mud, and gravel away with these simple, robust and easy to mount Revolt and Devote fenders. With clearance for up to a 42c tire, the Revolt and Devote Fender Set will give you the protection you need as you crush long, multi-terrain miles in any weather.
- Compatible with all 2019-2021 Revolt and all 2021+ Devote in all frame sizes
- 45mm wide fender fits up to 700x42c tires
- High protection against corrosion and UV damage
- Stainless steel fender stays
- Lightweight and durable
- Easy to mount full fender protection
Compatibility: 2019-2021 Giant Revolt and 2021+ Liv Devote
$19.95 - $19.99
Mountain Bike Mud Fender
Keep the crud off your frame with the Fox Mudguard. Designed to fit multiple mountain bike fork and wheel sizes, the Mudguard is an essential accessory for MTB riding in wet conditions.
Key Features
Universal design fits most current mountain bike forks
100% polyurethane
$59.99
- Made of resistant chromoplastic
- Stainless steel bracket and stays
- Pre-assembled for fast and easy installation
$65.99
- Made of resistant chromoplastic
- Stainless steel bracket and stays
- Pre-assembled for fast and easy installation
- Extra long mudflaps provide ultimate coverage
$52.99 - $65.99
- Made of resistant chromoplastic
- Stainless steel bracket and stays
- Pre-assembled for fast and easy installation
- Extra long mudflaps provide ultimate coverage
$84.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Product details
Original replacement fenders for Electra Townie bikes
Color matched for direct compatibility
$66.99
Functional. Fashionable. Fenders.
Keep you and your threads clean and dry by adding stylish fenders.
- Front and rear full-length fenders designed for use on Townie 24-inch bicycles
- Fits Step-Thru Townie Original models
- Compatible with tires up to 2.0-inch wide
- Protects against pesky mud and splashes
$84.99 - $89.99
FUNCTIONAL. FASHIONABLE. FENDERS.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
PRODUCT DETAILS
- Original replacement fenders for Electra Townie bikes
- Color matched for direct compatibility
$66.99
A pair of Electra's Townie Aluminum Fenders on your ride will let you pedal even in less-than-ideal conditions. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.
$49.99
Our credo when designing the ACID Mudguard Set? Maximum versatility! It fits most 28in trekking bikes with a maximum tyre width of 1.4in. Clever finishing touches like glossy icon details, the ACID adapter system, FEM-optimised design and an integrated lighting cable guide add style and practicality to any bike. It's even compatible with our ACID rear light integration technology. The complete package! BB-Mount: The mudguard is mounted to the Bottombracket. ST-Mount: The mudguard in short design is mounted to the seat tube with an adapter.
$34.99
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets.
CONSTRUCTION
• Lightweight red anodized aluminum
MOUNTING SYSTEM
• Mount to quick release skewer
ADDED BENEFIT
• A quick and easy solution to make fenders fit
• Set of four
$104.99
Bikes have changed, and so should fenders! We threw traditional fender blueprints out the window and designed fenders that solve real problems and are as close to 'fit-everything' as possible.FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is avoided, and end of life plastic is kept out of landfills or incinerators. And because we're trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel.From a design side, the attractive matte finish has the look of alloy fenders, but none of the drawbacks. Dramatically increased length solves the problems of your feet getting wet up front, and your gear (and your riding partner) getting wet out back.Each set of fenders includes our proprietary AXLERUNNER™ and FRAMERUNNER™ mounts, and an expanded hardware assortment to ensure you will be able to fit fenders to almost any bicycle, even if your bike has disc brakes, suspension forks, or simply wasn't designed with provisions for fenders.Construction:
FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles
3.2 mm 100% Recycled stainless steel support stays
Stainless steel hardware
Mounting System:
FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist
AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets
Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole
Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp
Expanded selection of stainless steel mounting bolt lengths
Features:
Matte finish has the look of alloy, but won't dent or bend, and has a more durable finish
FLASCHEGUARD™ material retains all the strength and durability characteristics of regular polycarbonate
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray
3 M triangle rear logos enhance visibility
Support stays spaced for maximum stiffness and frame compatibility
Stays can be bent to accommodate unique mounting configurations
Front fender equipped with safety stays to protect against objects becoming lodged in wheel
Compatible with most Disc-Brake-equipped bikes
Compatible with most Thru-Axle-equipped bikes
Compatible with a wide range of suspension forks
Wide range of tire compatibility
Profile designed for optimal tire clearance
Sold pre-assembled for quick mounting
Lifetime warranty
Wheel Size Compatibility: 26" / 650B Radius: 350 mm Profile width: 60 mm Tire Compatibility Range: 26 x 1.5 - 2.0" / 650B x 32 - 47 mm Smooth Front Fender Length: 750 mm / 29.5" Rear Fender Length: 1295 mm / 51" Weight: 720g
$109.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be.
FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel.
CONSTRUCTION
FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles
3.2 mm 100% Recycled stainless steel support stays
Stainless steel hardware
MOUNTING SYSTEM
FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist
AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets
Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole
Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp
Expanded selection of stainless steel mounting bolt lengths
FEATURES
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray
3M triangle rear logos enhance visibility
Support stays spaced for maximum stiffness and frame compatibility
Stays can be bent to accommodate unique mounting configurations
Front fender equipped with safety stays to protect against objects becoming lodged in wheel
Compatible with most Disc-Brake-equipped bikes
Compatible with most Thru-Axle-equipped bikes
Compatible with a wide range of suspension forks
Wide range of tire compatibility
Profile designed for optimal tire clearance
Sold pre-assembled for quick mounting
Lifetime warranty
$109.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be.
FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel.
CONSTRUCTION
FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles
3.2 mm 100% Recycled stainless steel support stays
Stainless steel hardware
MOUNTING SYSTEM
FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist
AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets
Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole
Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp
Expanded selection of stainless steel mounting bolt lengths
FEATURES
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray
3M triangle rear logos enhance visibility
Support stays spaced for maximum stiffness and frame compatibility
Stays can be bent to accommodate unique mounting configurations
Front fender equipped with safety stays to protect against objects becoming lodged in wheel
Compatible with most Disc-Brake-equipped bikes
Compatible with most Thru-Axle-equipped bikes
Compatible with a wide range of suspension forks
Wide range of tire compatibility
Profile designed for optimal tire clearance
Sold pre-assembled for quick mounting
Lifetime warranty
$104.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be.
FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel.
CONSTRUCTION
FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles
3.2 mm 100% Recycled stainless steel support stays
Stainless steel hardware
MOUNTING SYSTEM
FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist
AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets
Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole
Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp
Expanded selection of stainless steel mounting bolt lengths
FEATURES
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray
3M triangle rear logos enhance visibility
Support stays spaced for maximum stiffness and frame compatibility
Stays can be bent to accommodate unique mounting configurations
Front fender equipped with safety stays to protect against objects becoming lodged in wheel
Compatible with most Disc-Brake-equipped bikes
Compatible with most Thru-Axle-equipped bikes
Compatible with a wide range of suspension forks
Wide range of tire compatibility
Profile designed for optimal tire clearance
Sold pre-assembled for quick mounting
Lifetime warranty
$104.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be.
FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel.
CONSTRUCTION
FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles
3.2 mm 100% Recycled stainless steel support stays
Stainless steel hardware
MOUNTING SYSTEM
FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist
AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets
Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole
Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp
Expanded selection of stainless steel mounting bolt lengths
FEATURES
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray
3M triangle rear logos enhance visibility
Support stays spaced for maximum stiffness and frame compatibility
Stays can be bent to accommodate unique mounting configurations
Front fender equipped with safety stays to protect against objects becoming lodged in wheel
Compatible with most Disc-Brake-equipped bikes
Compatible with most Thru-Axle-equipped bikes
Compatible with a wide range of suspension forks
Wide range of tire compatibility
Profile designed for optimal tire clearance
Sold pre-assembled for quick mounting
Lifetime warranty
$104.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be.
FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel.
CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles
3.2 mm 100% Recycled stainless steel support stays
Stainless steel hardware
MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist
AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets
Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole
Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp
Expanded selection of stainless steel mounting bolt lengths
FEATURES Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray
3M triangle rear logos enhance visibility
Support stays spaced for maximum stiffness and frame compatibility
Stays can be bent to accommodate unique mounting configurations
Front fender equipped with safety stays to protect against objects becoming lodged in wheel
Compatible with most Disc-Brake-equipped bikes
Compatible with most Thru-Axle-equipped bikes
Compatible with a wide range of suspension forks
Wide range of tire compatibility
Profile designed for optimal tire clearance
Sold pre-assembled for quick mounting
Lifetime warranty
Page 1 of 4
Next page