Tools

Size: 13x2cm A set including 3 levers This is only 1 set of 3 levers.

Chain rivet extractor for 10, 11 speed chains. Chain pin guide with 1 spare pin.

Hex Key Wrench available in two sizes: 2/2.5/3mm and 4/5/6mm

Torx Wrench sizes: #1: Torx T25, T30, T40 #2: Torx T10, T25, T30 TB-2638: Torx T25, T30, T40

- TB-5501: Aero spoke key 0.9/1.1/1.3/1.9mm. - TB-5502: Aero spoke key 0.9/1.1/1.3/1.8mm - Designed with deeper slots for a more secure and stable grip.

Designed to hold socket to bottom bracket axle to prevent slippage during installation or removal. To be used with square tapered, Octalink and ISIS drive sockets in order to secure the tool to the BB during installation and removal.

Chain rivet extractor fits 1/8" to 3/16" chain only. Chain pin guide with 1 spare pin.

- Specialy designed tools to safely remove/install crank bearings without using a hammer

- Freewheel remover for Shimano HG cassettes with center pin

Replacement pins for Super B chain tools.

Double-ended to fit most slotted-type nuts, the other side is the tool to remove the dust cap out of the cranks, using a hex key you can easily install/remove the chaining bolts.

TB-1938: Crown race setting system includes 1 x setting tube, 3 x 1" inserts and 3 x 1.125" inserts for installing the crown race, used on most 1" x 1.125" headsets TB-1939: Crown race setting system includes 1 x setting tube, 3 x 1" inserts and 3 x 1.125

Comes in multiple sizes for varying needs.

TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger

TB-1090: For 30 mm diameter freewheel, Use with 24mm spanner. TB-1095: For 1.375" diamter freewheel, Use with 24mm spanner

Heat treated and made to last. For 3.2, 3.3, and 3.5mm nipples.

Hub cone wrenches available in various sizes

-10, 8, and 6mm L-shaped hex wrenches for high-torque applications - Comfortable rubber grips - High-quality steel

Bit sizes: Hex 3, 4, 5, 6, 8mm. Comes with Super B case.

Use on 8, 9, 10 speed and BMX/Fixie chains (3/32" and 3/16").

Ergonomic T-Handle. Extra long sockets to fit the deepest of rims.

Clean or restore threads damaged threads in crank arms. Available in 0.5" or 0.625".

15mm Pedal Wrench

Remove BB30 Bearings

Remove BB86, BB90 bearings

Professional hub cone wrenches available in multiple sizes.

Designed to help set up brake shoes right the first time. Works with rim widths between 14-24mm and rim depths up to 50mm.

Features two different slot depths. Made from high quality steel to gently adjust bent or damaged brake rotors.

- High grade steel screwdriver - Ergonomically-designed grip

Various spoke wrenches for differing spoke sizes and companies.