Racks

Built specifically to work with fat tire bikes, and designed to fit on the front or rear of your bike, this might be our most versatile rack. Fits fat and most tire sizes Our patent-pending adjustable width design will work with most fat bike frame, hub and tire widths, without having to twist or bend anything. Front or rear compatible Can't decide if you want to install on the front of the rear of your bike? Don't worry about it, this product does both easily. Disc brake compatible Sometimes these new fangled disc brakes get in the way of accessory installation. This product was designed to make sure that isn't an issue. Height and width adjustable Our patent-pending adjustable width design will work with most road and mountain bike hub and tire widths, without having to twist or bend anything. This rack will happily accommodate most road and mountain bike wheel sizes. This includes the diameters 26", 650b, 700c, 27.5" and 29" and widths from 23c up to 3". Aluminum construction Constructed of T6061 aluminum, this product is both lightweight and strong. Lifetime warranty

Genuine replacement parts. A MIK-compatible rack that is easy to mount. Details: - MIK: Mounting Is Key - MIK mounting system provides security and integration - Mounting hardware not included

• Paddle cradles w/15mm straps keep your board safe and secure, easily removed when not needed • Shortboard rack features strong extruded aluminum clamp with durable anodized finish • Fist most bikes with seat post diameters of 25-32mm diameter and carries most surfboards up to 8' in length • Longboard rack with adjustable-length arms fit most 26" wheel bikes, lightweight alloy construction, 25kg/55lb capacity • Longboard rack fits most surfboards up to 10' in length (not designed for stand-up paddleboards) • Rust-resistant hardware

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Basil Portland Front Carrier High is an aluminium carrier suitable for bicycles measuring between 26 and 28 inches, with a maximum load capacity of 10kg. The Basil Portland Front Carrier High is a vintage style carrier in eye-catching aluminium, suitable for use with various bags from the Basil Portland collection. In addition to bags from this range, this carrier will accommodate similarly sized and shaped bags with ease. At the front end is a removable strap that helps keep your chosen bag or basket in place during journeys. The carrier has a maximum load capacity of 10kg and is suitable for attachment to 26 and 28 inch bike frames. The Front Carrier High from the Basil Portland range sports rounded edges for an eye-catching finish, with easy attachment that requires minimal fuss and no complex tools. This carrier also allows you to attach a lamp to enhance visibility in the dark. What’s more, the front support is bolstered by a front fork bracket, suitable for 12-13mm axles. Features: Lamp mounting is possible with this carrier. Removable belt strap for extra support. Suitable for 26 and 28 inch bikes. Stylish vintage look.

- The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or hardtail MTB without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts levels independently of the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Seatstays with hook-and loop-straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, KLICKfix / RackTime Snapit or Vario system bags - Max Load: 12kg / 26lb - Clamp for rear reflector - Size: 42 x 33. 2 x 14.5cm / 16.5" x 13.1" x 5.7" - Weight: 960g / 2.12lb

Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.

Rack 'em! Designed to complement the clean lines of the Townie collection, the Townie rear rack adds utility while still looking great. - Original equipment replacement rear racks for Electra Townie Commute bikes - Color-matched for direct compatibility - Compatible with the Bontrager Interchange system - Max load rating is 55lbs (25kg) - Size: 700c - Material: Aluminum

Keep your bike operating as it should. Original replacement rack for Electra Townie Go! 7D. Details: - Color matched for direct compatibility - Mounting hardware not included

JACK lets you carry more things on your bike. It requires no tools to fit and securely attaches to bikes with a handle bar diameter of 22.2, 25.4 and 31.8mm. Its quick and easy to attach and remove so you can swap it from bike to bike. JACK is made from solid 304 Stainless steel and comes with two adjustable length bungees (1.2m) with snake heads to secure your baggage, a bunch of spacers and inserts and 5 different length Loadstraps to fit JACK to your bike. The Black JACK is black powder coat finished. JACK is rated to carry 5kg max based on the negative affects of bike handling when loaded.

The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).

- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs

Original replacement rack for Electra Townie Path. - Color matched for direct compatibility - Mounting hardware not included

Minoura's KCL-2R Rear Carrier is made from welded steel tubing and mounts to the rear of the bicycles. It has an extra large surface area. - Fits 26 to 700c wheels - 11.4 x 16.9 - Max load of 40 lbs. - Durable black powder coat finish - Made of strong steel tubing

Give the front of your Ponto Go! an upgrade with this tray. - Made with 67% recycled fishing nets - Colors may vary due to recycled materials - Reflective bungee net included - Designed to securely carry a ball - Attaches to the Ponto Go! Headtube - Includes attachment hardware

The Randonneur Rack will fit most bikes with regular saddles. The minimum clearance required between the seat rails and the top of the bicycle seat tube is 4 inches (10cm) for the short setup and 7 inches (18 cm) for the long setup. Want to carry stuff, but don’t want a full-fledged bike rack? Before the Randonneur Seat Post Rack, it was heavy beam racks that clamp hard on the post and rotate around it, or the flimsy and flapping, low capacity bags that clip on a tiny ring bolted around the seat post. Lightweight, Yet Durable This seat post rack is strong, light, stable, goes on and off in seconds, and adjusts to fit both longer or shorter seat post setups. A sleek quick release bracket attaches to both sides of the seat rails, forming rock-solid attachment points. The front of the rack gently envelopes the seat post with a soft rubberized clamp that is secured with a velcro strap. The three point attachment system of the Randonneur Seat Post Rack brings unequaled stability – it feels like it’s bolted onto the frame! Move it from bike to bike depending on what type of riding you want to do. Dual Attachment Points With its dual attachment points, the Arkel Randonneur Rack is designed to combine both strength and stability with a very lightweight structure. The vertical load is carried by the seat rails while the seat post abutment point provides the exceptional lateral and vertical stability to the system. Moreover, the soft polymeric seat post bracket acts like a shock absorber to dampen shocks from rough road conditions. The Randonneur Rack is ideal for carrying our immensely popular TailRider, or any top rack trunk bag for that matter.

Rack 'em! Designed to complement the clean lines of the Townie collection, the Townie Commute front rack adds utility while still looking great. - Original equipment replacement front racks for Electra Townie Commute bikes - Color-matched for direct compatibility - Max load rating is 20lbs (9.1kg) - Size: 700c - Material: Aluminum

Genuine replacement parts. Custom-designed for Electra Sprocket models that look stylish and add carrying capacity. - Original replacement rack for Electra Sprocket - Aluminum construction - Weight capacity: 33 lbs (15 kg)

Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.

Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.

Do you have a bicycle with disc brakes and can't find a rack to go with them? Well, grab Axiom's Journey Disc Rack to carry your gear and you're all set for adventure. It's constructed from durable and light aluminum tubing, and has a looped design for excellent support for even heavy loads. There are also rear bars that prevent panniers swinging in and striking the wheel. The right side of the rack mounts to your eyelets, and the left attaches to the disc brake tab. This great rack also has a platform on top, which adds strength and doubles as a mini fender. And there's a place to mount a taillight, too (sold separately). The bicycle industry’s original disc-brake compatible rack. We designed this rack as a problem solver back when disc-brakes were still a new thing. The Journey® Disc remains a favorite to this day thanks to its flexible yet elegant mounting options and industry-leading weight capacity. - Hand-welded, tubular 10.2mm 6061 T6 aluminum. - Extra-long (280mm), adjustable Versalock® arms (for frames with eyelets). - Traditional stay on right (drive side). - Adjustable Versalock® stay on left (disc side). - Triple stay design has a sweepback frame that prevents pannier bags from bouncing into your wheel while you ride. - Suitable for frames where disc-brake placement causes a compatibility issue with traditional racks. - Generous platform size is optimized for top loading things like trunk bags and rear baskets. - Designed for modern bicycles by sitting your load further back over the wheel where it is supposed to sit. - Increased heel clearance. - Enhanced trunk bag / seat clearance improves trunk bag function, especially on smaller frames. - 280mm Versalock® arms are long enough to fit even the smallest of bikes. - Versalock® arms can be DIY bent up to 30 degrees without reducing strength. - Double welded for extra strength and long-term durability. - Ample room for a full range of fender styles - Reflector/light mount, Frame bolts included

Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.

Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

Axiom's Streamliner Disc DLX Rack fits on bikes with disc brakes that don't have eyelets. It's made of reliable and light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Make life easier and your bike cooler. MIK stands for Mounting is Key, and this rad front rack comes equipped with this functionality. Because easy is the name of the game. Easy on. Easy off. Rack it. Stack it. Pack it. - Compatible with MIK accessories - Alloy heavy-duty 12mm diameter bars - Carrying capacity up to 10kg or 22lbs. - Stainless steel hardware included - Front rack designed to be compatible with all Electra 26", 27.5" and 700c wheels

A MIK compatible rack that is easy to mount. Genuine replacement parts MIK mounting system provides secure, integrated mounting with compatible bags. - Quick-and-easy installation adds storage and utility to compatible bikes - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard boot bags or panniers - MIK accessories require brackets on underside of bag or pannier to be moved to narrow mounting holes - Single-bolt strut mounts allow maximum adjustment and easy installation - Hardware sold separately - For use on e-bikes with RIB system - Weight capacity: 55 lbs (25 kg) - Material: Aluminum

Keep your bike operating as it should. Original replacement rack for Electra Vale GO! Details: - Color matched for direct compatibility - Mounting hardware not included