BMX

In BMX racing, that first sprint from the gate is the most important part of the race. Shimano knows this, so their DXR cranks are unbelievably stiff, perfect for getting out in front for the holeshot. They borrow Hollowtech II technology from the Saint downhill cranks to make them rigid, light and super tough. They sport a narrow Q factor for smooth pedaling and steel pedal inserts for durability. When 2nd place just won't do, DXR is the answer.

- Lightweight Forged/Machined Design - 2 Finger Lever - Silver Braided Hose - Available in Black/Red and Red/Silver - Rear is available with the Hyrdo Twisteer Gyro! 160mm Rotor Uses DOT 4 Fluid

Ahhh yes, the legendary Pitchfork. From the trails to the streets, this fork has you covered. S&M builds these True Temper chromoly beauties in their Santa Ana, CA shop with years of manufacturing knowledge. With laser-cut dropouts, a CNC'd top cap and a zinc coating before painting, the Pitchfork is ready to rumble. Following in that tough style, the tried and true straight-leg design is ready for more action than a Bruce Lee movie marathon, so you know it can handle what you're throwing at it. And, it's available with your choice of 3/8-inch or 14mm axles.

- FIT "Indent" Arms: Concaved design increases strength and dent resistance, matched to 23.80mm (24mm) hollow CrMo spindle - Works with all 15/16” center bore sprockets - RHD / LHD compatible with two sprocket bolt locations - B/B Kit included (replacement bearings also available)

- FIT "Indent" Arms: Concaved design increases strength and dent resistance, matched to 23.80mm (24mm) hollow CrMo spindle - Works with all 15/16” center bore sprockets - RHD / LHD compatible with two sprocket bolt locations - B/B Kit included (replacement bearings also available)

A super clean box tubular crank with Concave sections to increase stiffness and increase dent resistance. Length (mm): 175 Pinch Bolts: N/A Spindle: 19mm Hollow Chromo Spindle Bolts: 3/8" x 24tpi Flush Mount (x2) Spindle Splines: 48 Sprocket Bolt: 10 x 1.5mm (x1) / 8 x 1.25mm (x1) Weight (oz): 29.15

These clean and classic looking cranks are not only easy to maintain and install, but are also very lightweight and strong. Installation tool and grease are included with every set. Length (mm): 170 or 175 Pinch Bolts: Spindle: 22mm HT Hollow Chromo Spindle Bolts: Spindle Splines: 48 Sprocket Bolt: Weight (oz): 28.9

FOR USE WITH 22" WHEELS AND OUR 22" HOLMES FRAME. Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.39 lb

-Super Thin Design -Lots of Pins For Traction -Double DU Bearing System -12mm Chromoly Spindle

- URBAN/FREERIDE PLATFORM PEDALS - MINIMAL PINS AND A LONG SPINDLE - CNC'D ALUMINUM BODY - 12MM 4140 CROMOLY SPINDLE - PRECISION/NEEDLE BEARING SYSTEM - ALLEN BOLT TRACTION PINS - BLACK, GREEN, OR RED FINISH - LASER ETCHED LOGO - 530g

- Race/Freeride Platform Pedals - Lots of Pins and a big surface area - CNC'd Aluminum Body - Burley 4140 Chromo Spindle - Bolt-On Spindle (no C-Clip) - Double I-Glide Bearing System - Allen Bolt Traction Bolts - Laser Etched Logo

- Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 14mm Weight (lb): 2.11

- Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.11

The same great Pitchfork, made for a 24" wheel. - Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 366 Steerer Tube Length (mm): 162.5 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.3

The same great Pitchfork, but with 990 mounts for you front brake guys. - Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 14mm Weight (lb): 2.3

The same great Pitchfork, but with 990 mounts for your front brake guys. - Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Height (mm): 315 Steerer Tube Length (mm): 162.2 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.3

The same great Pitchfork, but with 990 mounts for your front brake guys. - Made in USA - 100% “4Q Baked” heat treated cromo - Light/strong XLT extruded insert - Compatible with integrated headsets only - Lifetime warranty Steerer Tube Length (mm): 171mm Offset (mm): 33 Bearing Race: Press-On Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 2.37

This is for all you racers. A light but strong fork that will take the punishment any track can throw at it. Height (mm): 315.5 Steerer Tube Length (mm): 171 Offset (mm): 33 Bearing Race: Press-On Compression Bolt: N/A Compression Bolt Tool: N/A Axle Slot: 3/8" Weight (lb): 1.9

S&M took their classic Pitchfork and made it even better with the Tapered Pitchfork XLT. - Tapered legs - Integrated race Height (mm): 315 Steerer Tube Length (mm): 160 Offset (mm): 32 Bearing Race: Integrated Compression Bolt: 10 x 1.25mm Compression Bolt Tool: 6mm Allen Key Axle Slot: 3/8" Weight (lb): 1.99

- RACE/FREERIDE PLATFORM PEDALS - LOTS OF PINS & A BIG SURFACE AREA - CAST MAGNESIUM BODY - 12MM 4140 CROMOLY SPINDLE - PRECISION/NEEDLE BEARING SYSTEM - ALLEN BOLT TRACTION PINS - BLACK, WHITE, OR RED POWDER COAT FINISH - MOLDED LOGO - 470g

- Race/Freeride platform pedalsSet Screw traction pins - CNC'd Aluminum Body - Burley 4140 Chromo Spindle - Bolt-On Spindle (No C-Clip) - Double I-Glide Bearing System - Laser Etched Logo Weight: 360g

The Tribe cranks belong to a long line of quality Eastern cranks. These 100% chromoly three-piece cranks are strong and really good looking. - The Arms are concave and tapered on three sides to increase strength. - Front side of the cranks is smooth to be ankle friendly - 23T micro drive compatible - Post weld heat-treated - RHD and LHD compatible - Comes with all tools neeed to assemble and remove both arms Length (mm): 175 Pinch Bolts: N/A Spindle: 19mm Hollow Chromo Spindle Bolts: 3/8" x 24tpi Flush Mount (x2) Spindle Splines: 48 Sprocket Bolt: 10 x 1.5mm (x1) / 8 x 1.25mm Nano (x1) Weight (oz): 29.3

La Casa's wheels are built tough and come with all the features needed to stand up to your riding. This rear wheel has a single-wall rim for reduced weight, and it rolls on smooth sealed cartridge bearings. A 9T cassette with sealed driver and a 14mm chromoly axle ensure durability for the park and trail. Forged anodized hub shells match the rim color, and there are clean laser etched logos for a little added bling. • Axle: 14mm chromoly • Driver: 9T Cassette, sealed driver • Fully Sealed Cartridge Bearings • Driver Bearings: 6802 (x2) • Hub Shell Bearings: 6902 (x2) • Driver Pawls: La Casa Spring & Pawl Kit • Driver Spring: La Casa Spring & Pawl Kit • La Casa Rim Strip

La Casa Wheels are packed with features including smooth rolling sealed bearings, forged anodized hub shells with color matched rims, solid chromoly axles and clean laser etched logos. Deliver great value and quality to your customers with these sturdy, affordable and colorful wheels. Key Features: - Fully Sealed Cartridge Bearings - 14mm Chromoly Axle - 9 Tooth Sealed Driver - La Casa Rim Strip - 18"x 36 hole Single Wall rims - Replacement hardware readily available Axle: 14mm Driver: 9T Cassette Driver Bearings: 6802 (x2) Driver Pawls: La Casa Spring & Pawl Kit Driver Spring: La Casa Spring & Pawl Kit Hardware: Chromo Hub Shell Bearings:6902 (x2) Weight (oz):N/A

Built around a fully sealed bushing system to save weight, the Surge alloy pedal is constructed of 6066 CNC alloy, it features a low-profile slender design and cro-mo spindle. Built to last, the Surge pedal set comes complete with a 17mm maintenance tool and replaceable pins. Lightweight and uncomplicated, the Surge pedals are a cut above the rest. Material: 6066-T6 alloy cnc body, crmo axle Size: 9/16" Bearings: sealed bearing with bushing system & nylon impact ring Colors: black, blue, white, high polished Features: replacable pins / extremely strong pedal body and bearing / crmo spindle / extra pack replaceable pins & nylon impact ring Weight: 423g (14.92oz : 0.93lbs) (per pair)

A beast like pro rider Dillon Lloyd needed a bar built to withstand the biggest drops and burliest of crashes. The Buck bar is one of the first bars in BMX to utilize the new 25.4mm clamping technology, allowing for a stronger, stiffer bar that a rider like Dillon can have full confidence in, without having to worry about it slipping or breaking when things get rough. WeThePeople used time-tested "M2" heat-treated, 4130-chromoly tubing and Dillon's own geometry to create this ultra-dependable set of bars you can get "Buck" with. - Tubing: 7/8" multiple butted - Easy-cut marks on the end of the bars - Dual radius bends for extra strength - Backsweep: 11-degrees - Upsweep: 1.5-degrees - Weight: 22.2mm bar: 895g (31.5oz/1.97lbs), 25.4mm bar: 925g (32.48oz/2.03lbs)

Rolling on 18s? Upgrade to Black Label's Vise 18-inch Rear Wheel. It's strong thanks to a 36-spoke build, a quality hub and a tough and light aluminum rim. It's available in a 9T driver and 14mm axle model or Microdrive with a 3/8-inch axle setup.

Multi Butted Chromoly 4 pc bars with full post weld heat treatment. Width - 28" Rise - 8.25" Backsweep - 11 Upsweep - 5 Weight - 27.4 oz

Jared Washington signature. Multi Butted Chromoly 2 pc bars with post weld heat treatment. Width - 28.5" Rise - 8.5" Backsweep - 11 Upsweep - 2 Weight - 27.3 oz

The Sway bars are 13 butted heattreated 4130 chromoly. They are 27.5" wide, 7.9" high, with 2.5 of upsweep, 10.5 of backsweep and have a .75" crossbar. Weight - 25 oz