Accessories

The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

The Wahoo KICKR SNAP makes indoor training a "snap!" It's a convenient, easy to set-up wheel-on smart trainer with the realistic ride experience Wahoo smart trainers are known for. The SNAP's legendary flywheel features technology that creates the same resistance experienced when riding outdoors. Plus, no other indoor bike trainer has more software training options, including Zwift and Trainer Road. The KICKR SNAP includes LED lights for connection status, third party power meter support, and the power measurement is now accurate up to +/-3%. - Designed for consistent power measurement of up to 1500W and accuracy of +/- 3% so that you can monitor and adjust your intensity. - Visual confirmation that KICKR SNAP is powered, connected and transmitting via Bluetooth Smart and/or ANT+ - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR to be controlled from any FE-C enabled device or application. - SNAP's wheel-on design makes it easy to turn your road, mountain, or TT bike into a powerful indoor smart trainer. - Made from high strength carbon steel and featuring a wide stance, SNAP is designed to keep its feet firmly planted on the floor and your bike securely locked in so you can train with confidence. - When connected to your device, it automatically sets your resistance via your favorite app or software - The SNAP flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and Trainer Road. - Get vital cycling metrics on your indoor ride. - Low operating sound, so no shouting required! - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.

Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)

The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability

The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups. - 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs - 8 installation drifts for standalone bearing installation - Organized in a convenient storage case - Full list of compatible bearing inner/outer diameters found on instructions/parts diagram NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).

The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets. - Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm - Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed - Organized in a convenient storage case

The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability

Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims, and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder-coated heavy-gauge steel and is manufactured, assembled, and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use. Wheel Capacity: - Maximum wheel size: Up to 29" + with or without tire - Maximum hub width: 200 mm (7.87") - Maximum rim width: 102 mm (4") - Hub compatibility: Accommodates quick release and solid axle hubs, also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: - Bolt to benchtop — mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center - Clamp in vise — base is 76 mm (3") deep - Install in TSB-2.2 Truing Stand Base

Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.

The EVOC BIKE TRAVEL BAG XL is the ideal transport case if more space is needed. This bike bag for Plus- and Fat Bikes is the mobile alternative for storage to a bike box with maximum protection for frame, wheels and other components, whether for bike shipping or flying. - Fits Plus- and Fat Bikes - Variable Frame Fixation Equipment (VAFFE) - Separate Wheel Compartments - Collapsible to: 143 x 41 x 28 cm - Maximum wheel base: 125 cm incl. handle bar- and fork protection block (130 cm without handle bar- and fork protection block) - Reinforced fork mount

Turn your 66" trailer into a 78" trailer. Widen your 66" wheel track and Crossbars by 13" with this kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks. - Upgrade your RACKandROLL 66" trailer to a 78" trailer - Comes with two 78" Crossmembers and two 78" Yakima Crossbars Product Specs: - Weight: 17.31 lbs. - Limited One Year Warranty

- Fits most: Cross Country, All Mountain, Enduro, Freeride, Downhill Bikes up to 29“, Gravel, Road, and Triathlon Bikes - For safe transport of road bikes and triathlon bikes, you need the BIKE STAND PRO - Smooth running skate wheels (replaceable) - Molded Polycarbonate Bike Block - Dimensions 138x39x85 cm - Weight 8.6 kg / 19 lbs

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment. Kit Includes: - AWS-1 3-Way Hex Wrench - BBB-4 Big Blue Book of Bicycle Repair - CC-4 Chain Checker - CM-5.3 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - DH-1 Dummy Hub - DT-2 Rotor Truing Fork - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%

With a 70-pound carrying capacity and coil-spring suspension, the Coho XC® is our all-terrain bike trailer for singletrack bikepacking adventures.

- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life

For all mountain bikers who already use a direct mount SRAM single crank set or a modular SRAM crank set with a Q-factor of 168mm (these cranks use 3 bolts to tighten the spider). Also fits Truvativ cranks with 3 bolt interface like the STYLO Compatible frame formats BB30, BB386EVO, BB86, BB92, BBRight, BBRight Pressfit, BSA68, ITA70, PF30, DUB Sensor weight 104 BCD Boost 125 g *Does not fit Trek Farley

Cycling power meter with sensor on the left pedal only. Meet the Assioma Pedal Based Power Meter from Favero Electronics. With Cutting-edge cycling technology to make the most of each pedal stroke, the Assioma is extremely accurate with precise watt measurement thanks to years of careful research and development. Experience impressive ease of use, precision and reliability with no protruding elements or interference while you're outo on the road. Integrated and rechargeable, get at least 50 hours of battery life with a single charge.

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame

Battery anxiety? Not with a Turbo SL. Our discreet and compact SL Range-Extender Battery provides up to 40 additional miles (64km) of mountain-flattening power. More range, more riding. - Only available for purchase at your local dealer. - 160Wh capacity delivers up to one additional hour of riding. - Compatible with Turbo SL Bikes. - Includes a 3 LED charge-level indicator. - SL Range Extender Cable 220mm ROAD 98920-5655 SOLD SEPARATELY. - SL Range Extender Cable 160mm MTB 98920-5650 SOLD SEPARATELY.

Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 540 cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior positional accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any conditions. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.

Train brilliantly with the smaller-sized Forerunner® 265S GPS running smartwatch. Its colorful AMOLED touchscreen display stands out while the training readiness feature — which tells you when you’re primed for a productive session — helps you crush your goals. Wake up to your morning report with HRV status to see health insights alongside an overview of sleep, recovery and training outlook (data presented is intended to be a close estimation of metrics tracked). Plan your race strategy with the race widget, which enables personalized daily suggested workouts that adapt to performance, recovery, the race you’re running and its course. Get ready to make the most of every run with wrist-based running power and multi-band GPS. And when you want to switch it up with cross training, choose from more than 30 activity profiles, including triathlons, cycling, swimming and more. Get a more complete picture of your health, not just a glimpse, from your Forerunner 265S with up to 15 days of battery life in smartwatch mode.

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

Versatile and clever The Nyon is the perfect companion for embarking on your fully connected eBike experience. Nyon connects to your smartphone with the eBike Connect app and exchanges data about routes and activities. The color display serves as an intelligent guide when you are exploring new places and as your personal trainer by providing you with fitness data. The touch screen makes the all-in-one computer both intuitive and easy to use and is operated using the separate control unit during your ride. Whether you're using your eBike for long rides or short everyday trips, the robust, easy-to-read display ensures that you are ready for all requirements and weather conditions. The Nyon computer – for a smarter, more intuitive and connected generation. This is what Connected Biking feels like. Simple operation A convenient option: Nyon is intuitive to use thanks to the touch screen function and can be operated using the separate control unit during your ride. Award-winning design Impressive both inside and out: The 3.2-inch high-resolution color display combines smart functions with an elegant design that has won a Red Dot Design Award. Easy to read A clear view in any light: The display brightness and backlight automatically adapt to the ambient light. A special coating reduces glare and finger marks. You can choose between a dark and a bright display with maximum contrast. Individual screens Focus on the essential: You can customize the user interface of the display to suit your specific requirements. This gives you a clear view of the information that you need at all times. Always ready for action Whatever the weather: The touch screen of the robust display remains fully functional even when exposed to rain or dust and can be operated while wearing bike gloves. Savings Screen If you want to find out how much you could save by choosing to use your eBike instead of a car, check out the info on the new Savings Screen. This is activated in the screen management settings. You can also see a comparison of the current and previous weeks, or choose a different currency in the settings. Smart connectivity functions Perfectly connected: Nyon is part of an intelligently connected system and opens the door to the connected eBike World of Bosch thanks to the eBike Connect smartphone app and an online portal. Data synchronization Constant communication: As soon as Nyon connects to your smartphone or Wi-Fi, the computer connects to your eBike Connect account and automatically synchronizes the riding data. Choose your ideal position Optimum position: To ensure the best possible readability, the display mount has two installation positions. The center mounting position above the handlebar is designed to meet the needs of eMTB riders, while tour riders can place the mount further forward. One device, several users One for all: You can share your Nyon with friends or family – everyone can then synchronize their riding data with their own account. Software updates Always up-to-date: Software updates or new maps can be conveniently downloaded and installed over the air.

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

- ELEMNT BOLT GPS Bike Computer - TICKR Heart Rate Monitor - RPM Speed and Cadence Sensors Advantage by design Get everything you need to boost your cycling performance all at once! The ELEMNT BOLT features a patent pending design that integrates the bike computer and mount, resulting in a CFD tested, highly aerodynamic system built to be on the front of your bicycle. Not to mention, it's super easy to set-up and customize with the free companion app and features dual-band technology, wireless connection & uploads, pre-loaded global maps and routes, and so much more. The TICKR heart rate monitor, RPM Speed sensor and pair seamlessly with the ELEMNT BOLT, so that you can get live and accurate performance metrics. The Wahoo ELEMNT Bike Computers are the most integrated GPS bike computers on the market with a full list of compatible hardware and smartphone apps. Includes Mounts for ELEMNT BOLT Bike Computer and RPM Sensors ELEMNT BOLT Two sturdy and secure mount options - an integrated out-front mount and stem mount. RPM Cadence comes with a crank and shoe mount. RPM speed comes with a hub mount.