Parts & Accessories

- Bike fork mounts you can put anywhere including truck beds, minivans and SUVs. - Includes standard 6 pcs plastic cap for different fork axle - Steel - Black - Skewer not included

- Installs easily in a truck bed or anywhere else you need a simple fork mount carrier

If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.

Protect your rides

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

Thru-axle adapter for the Kuat TRIO rack.

Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

Take an epic journey across the country. Explore new places never seen by man (...but perhaps by woman). Ride Ragbrai. Conquer the 24 hours of Moab. Drive to your favourite trailhead. Whatever your plans are, your Kuat rack is engineered to last a lifetime so we guaranty it to last a lifetime. Fits tube sizes from .75-2.75" 8 position 260 degree rotation Telescoping tube for varied vehicle heights The Trail Doc uses the vehicle as its base so there is no need to worry about unlevel ground or bikes being unstable during maintenance Trail Doc can easily mount to: Kuat Sherpa, Thule T2, Yakima Hold Up, and the Saris Cycle On/Cycle-On Pro with corresponding adapter

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Thru axle adapter sleeve for StreetRod, HotRod & SwitchHitter. Simply loosen the screws, remove your existing axle and slide this in.

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

- Sportrack Hitch Pin Bolt with Lock & Cable Lock - For SportRack Hitch Mounted Bike Racks

-Works with Swagman Trailhead and Longhaul models -Prevents Movement of bike during transportation

The Thule Xadapt 1 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.

Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.

Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).

An accessory that provides extra protection for bikes stacked close to each other. - Fits all types of frame geometries and is easily adjustable with no loose parts - Rubber spacer that separates possible contact points and prevents dents and scratches - Sturdy strap fixates the bikes together to prevent bike to bike contact - Versatile accessory that can be used in multiple situations such as transportation, parking, or storage

Modifies women's bike frames as well as BMX and non-standard frames to be carried on a hanging-style hitch and strap mount bike racks. Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX, and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. Features: - Telescopic adjustment (18" - 30.5”) fits most bike frames - New push button clamps for quick installation and removal - Molded rubber pads protect the bike finish - Thule Frame Adapter 982XT - Keeps bike securely centered and mounted on hanging-style rear mounts - Durable rubber collars secure easily and safely to bike stem and seat post

Attributes 15.2 x 7.6 x 7.6 cm Black Number of Bikes - 1 Carbon frame compatible - Yes Features & Benefits Easy to secure the bike to the bike rack with the locking skewer Heavy-duty metal construction holds bike securely when mounted to any flat surface Bike held stable with 9 mm lockable quick-release fork-mount skewer Locks the bike to the bike rack (lock included)

Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 32-inch - Fits Thule AeroBlade - Fits Thule SquareBar

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points or factory-installed racks. - Fits Honda Accord 4-dr Sedan with Normal Roof 2013 – 2017 - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fits Subaru Outback Touring 5-dr Wagon with Flush Rails 2017 – 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars TOYOTA - Camry 4-dr Sedan with Normal Roof 2018 - 2019 - Camry 4-dr Sedan with Panorama Roof 2018 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FORD - Focus 5-dr Hatchback with Normal Roof 2012 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars TOYOTA - Corolla 4-dr Sedan with Normal Roof 2014 - 2019 - Corolla S 4-dr Sedan with Normal Roof 2014 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars ACURA - ILX 4-dr Sedan with Normal Roof 2013 - 2019 HONDA - Civic 4-dr Sedan with Normal Roof 2012 - 2015 - Civic Si 4-dr Sedan with Normal Roof 2012 - 2015

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Wind fairing that redirects airflow over the roof rack for a quieter ride. - Attaches to Thule WingBar Evo, WingBar Edge, AeroBlade, AeroBlade Edge, and SquareBar Evo with included hardware - Around the bar tool-free mounting allows for quick T-track access - Clip-on design requires no tools for assembly or installation

Easy-to-install foot for Thule Evo roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles without pre-existing roof rack attachment points - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Quick assembly and install with click-in mounting brackets. No additional tools required - Securely holds the rack to the vehicle thanks to patented clamping technology - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Easy-to-install foot for Thule Evo roof racks, for vehicles with integrated fixed points, T-profile, or custom install rack attachment points. - Easy-to-install roof rack feet - For Thule Evo roof racks systems - For vehicles with integrated fixed points Features: - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with integrated fixed points, T-profile, or custom install rack attachment points - Secures to vehicle with Thule One-Key locks (sold separately) - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Check the Thule Buyer's Guide to find out which roof rack fits your car - Add Thule Fixpoint Kit Cover (sold separately) for a quick rack mounting solution - Maximum load: 220 lb. Please also check the maximum roof load capacity of your vehicle.

Easy-to-install foot for Thule Edge roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Easy-to-install roof rack feet - For Thule Edge roof rack systems - For vehicles without attachment points Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles without pre-existing roof rack attachment points - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Quick assembly and install with click-in mounting brackets. No additional tools required - Securely holds the rack to the vehicle thanks to patented clamping technology - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle

Easy-to-install foot for Thule Edge roof racks, for vehicles with integrated fixed points, T-profile, or custom install rack attachment points. - Easy-to-install roof rack feet - For Thule Edge roof rack systems - For vehicles with integrated fixed points Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with integrated fixed points, T-profile, or custom install rack attachment points - Secures to vehicle with Thule One-Key locks (sold separately) - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Add Thule Fixpoint Kit Cover (sold separately) for a quick rack mounting solution - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle

Easy-to-install foot for Thule Edge roof racks, for vehicles with raised railings. - Easy-to-install roof rack feet - For vehicles with raised railings - For Thule Edge roof rack systems - For raised railings Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Includes a single SKS key.

Safety and wheel straps for Joe Pro series strap racks. Includes one each.

Spare part for SideWinder

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

End caps for 86" Cross Bars. Includes four end caps Please note these end caps are specific to the 86" cross bar.

Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp. - Includes 2 FatStraps to carry one fat bike - Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty

Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).

Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install

Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. Product Specs: - Weight: 0.25 lbs. - Dimensions: L 2.75 in x W 1.50 in x H 0.50 in - Limited Lifetime Warranty

The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"