Liquid wax kit for skate skis, including Base Wax, LF WAX for mild and cold surfaces and a small nylon brush.
High fluoro glide wax -10°C to -32°C. For extremely cold snow . For fresh, old or man made snow. With additive that reduces dry friction. Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp: 155°C (311°F). A new special wax for extreme cold conditions with BW solid lubricant additive that reduces the dry friction in very cold snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HF04BWX can be used as a race wax alone or as a base for Cera F cold powder, such as FC04X.
Economy wax iron, Great for alpine and nordic, For all skiers, Value for the money 220 Volt. 800 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 110 Volt (product # T77110).
Welcome to the new revolution of skin skis - now take care of them. This Skin Ski Care Kit has what you need to care for and improve the performance of your skin skis. Use the cleaner to remove dirts and oils that you pick up on your long jaunts through the woods, then apply the HF Skin Care for incredible speed. Backcountry skiers and boarders take note, this stuff is amazing to improve the performance of your skins. Want to cover more ground and crush more vert? Then take care of your skins so they can take care of you.
Vauhti's Brass Brush helps start the brushing process with harder waxes, allowing softer brushes to finish the job.
Roto brush, Horsehair brush for wax and Cera F, For skiers and waxers, Quality horsehair The initial brush on all waxes. Used on regular waxes and Cera F. (Do not use the same brush on regular wax and Cera F.) 100 mm wide.
OVAL Brass Brush (8" x 3 .5" ) With Adjustable Hand Strap.
Liquid care product, which has been developed especially for maintenance of the skin strip of the skin skis. Effective, but gentle. Unique composition to improve the performance of the skin skis. It reduces build-up of impurities from the ski tracks to skin strips, and prevents the risk of icing of skin strips, thus maintaining and improving both grip and glide of the skin skis. The present composition does not comprise aliphatic and aromatic hydrocarbon solvents as their presence even in small amounts could lead to detachment of the skin strip from the base of the ski.
Featuring V05, V20 and V40 Swix Grip Wax, Swix Synthetic Cork and Swix Wax Scraper, all in a convenient zippered pouch
Hydrocarbonwax -2°C to -8°C. Good training wax, Easy to warm in,Good in dry conditions Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp: 140°C (284°F). A new and improved wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. It is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Hydrocarbonwax -4°C to +4°C. Good training wax, Easy to warm in,Good in dry conditions Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Large nylon brush.
Nylon finishing brush.
Start Grip Tape gives excellent grip for all conditions and thereforethere is no need to change the wax daily, when conditions change.There is no need for extra waxing tools or special waxing roomswhen adjusting Grip Tape. The Start Grip tape box includes all thatis needed for applying the tape. The box has 5 m of tape and itis enough for 2-3 pair of skis. When using tape, the skis are alwaysready for skiing! Swix tape enables you to make your own waxless ski. It works best from +2°C to -10°C in fine grained and older snow. The tape is sufficient for approx. 2 pairs of skis. It is applied in the kick section, approx. 50 cm from the middle of the heel and forwards. The tape can be removed and you have a regular waxable ski again.
Cold: -1/-10ºC or 30/14°F A universal glide wax for all snow types at cold winter temperatures. Mid: 0/-5°C or 32/23°F A special product for new and damp snow. Polar: -8/-25°C or 18/-13°F A wide operating range, good wear resistance – an excellent choice for coarse substrate and creaky snow in cold winter days. Wet: +10/-1°C or 50/30°F Wet conditions and mild winter conditions. Glide waxes are made of high-quality hydrocarbons and they do not contain fluorocarbons. Waxes are excellent for basic glide waxing, base preparation and maintenance as well as a base wax for racing.
$23.99 - $29.99
• For removal of old grip waxes and cleaning of dirty ski bases. • Vauhti Grip Remover is especially suitable for cleaning the grip zone of waxless skis. In order to function correctly the grip zone of waxless skis require regular cleaning to avoid the deposition of the maintenance agents and to remove the dirt picked up from the trail.
A fine soft nylon brush for polishing all waxes.
Fiberlene cleaning paper, For allround use, For all skiers, Quality paper Fiberlene Cleaning Towel. Large roll, 40 m/130 feet.
Base kick wax, For transformed and new snow, For racing and touring, Improved wear on kick wax To be used as first layer for all hard waxes in new fallen snow, transformed fine grained snow and old snow from +1°C to -20°C. Easy to apply: Rub on and iron in with a waxing iron.
Basebinder kick wax, For transformed and old snow, For racing and touring, Improved wear on kick wax A durable basewax for the VR and V-waxes for colder conditions than -1°C (30°F). To be used when the snow has been transformed (granular) and the wear on the wax is high. Rub on and iron in with a waxing iron. Cork smooth.
Light violet kick wax, For new and transformed snow, For racing and touring, Fluorinated and good in new and old snow A flexible wax for temperatures around freezing and colder.
LF liquid glides are suitable for all snow types and they can be applied on ski base quick and easy. The waxes are based on raw materials used in competitive skiing which provide them excellent glide and good durability. One waxing endures even 40 km depending on the snow conditions. Wet - Operating range: +10/-1°C | 50/30°F Mid - Operating range: +5/-6°C | 41/21°F Polar - Operating range: -2/-20°C | 28/-4°F
The only cleaner on the market, which has been developed especially for cleaning the skin strip of the skin skis. Effective, but gentle. Unique composition for cleaning skin strips of skin skis from any build-up dirt such as grip waxes from the ski track during ski use. The present composition does not comprise aliphatic and aromatic hydrocarbon solvents as their presence even in small amounts could lead to detachment of the skin strip from the base of the ski.
Klister in the KX series, For tempratures from +1°C to -4°C, For enthusiasts and racers, Great kick properties +1°C to -4°C (32°F to 25°F). Excellent klister on transformed cold coarse corn snow starting to get wet. Midlayer klister applied on Base klister (KX20 or KB20) to avoid that the top layer klister slides back into the glide zone. Scraper included.
Klister in the KX series, For tempratures from +1°C to +5°C, For enthusiasts and racers, Great kick properties +1°C to +5°C (34°F to 41°F). For wet and moist coarse corn snow. Scraper included.
Klister in the KX series, For tempratures from +2°C to +15°C, For enthusiasts and racers, Great kick properties +2°C to +15°C (36°F to 59°F). Wet snow klister. Used when the snow has a high water content such as slush, and the air temperature is well above freezing. Late spring klister.
KX45 VIOLET KLISTER -2C/+4, 55G -2C to +4C (28F to 39F). All round klister. For wet coarse snow as well as frozen corn snow. Scraper included.
The series is intended specifically for recreational skiers. Fluorinated LF glide series have improved glide performance compared to basic waxes. The content of these products is the same as Vauhti LF RACE-gliders except with lower fluorocarbon content. Wet Operating range: +10/-1°C | 50/30°F Mid Operating range: 0/-5°C | 32/23°F Cold Operating range: -1/-10°C | 30/14°F Polar Operating range: -1/-25°C | 30/-13°F
Mid: +5/-6°C or 41/21°F Polar: -2/-20°C or 28/-4°F LF quick glides are suitable for all snow types and they can be applied on ski base quick and easy. The waxes are based on raw materials used in competitive skiing which provide them excellent glide and good durability. One waxing endures even 40 km depending on the snow conditions. Quick glides can be used on cross-country skis, alpine skis and snowboards.
Small nylon brush.
Page 1 of 2 Next page